Best current price£28.45from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£28.45Visit shop Soho Lighting Black/Light Brushed Brass 2 Gang Switch With 1 Intermediate (1 X 2 Way Swich With 1 X Intermediate) Wht Ins Screwless - Size: H 86Mm X W 86Mm
Visit shop1 offer from £28.45
View price history by clicking the chart icon.
This guide is for electricians and homeowners looking for a flexible and stylish lighting control solution. The primary benefit is its customizable switch layout for specific room needs, with a caveat that assembly requires careful attention to wiring. This 2-gang switch with 1 intermediate from The Soho Lighting Company offers a brushed brass finish and uses grid switch modules, allowing for personalized switch arrangement on a single plate, suitable for various electrical applications.
| Colour | Gold |
|---|---|
| Model Part Number | SS-SH-20-LTS138-BBW |
| Brand | The Soho Lighting Company |
Yes, this switch is suitable for use with LED lighting, provided the total wattage does not exceed the switch's rating and the LEDs are compatible with standard dimmer/switch types if applicable.
The order is determined by the installer based on the specific wiring requirements and the desired user operation for each controlled light circuit. The modules are provided separately to allow this flexibility.
An intermediate switch (also known as a 4-way switch) is used in conjunction with two 2-way switches to control a light from three or more locations.
Installation should be performed by a qualified electrician familiar with UK wiring regulations and practices.
The product description does not specify if the finish is lacquered. It is generally recommended to use gentle cleaning methods suitable for unlacquered brass to avoid damaging the finish.
This is a 2-gang plate designed for specific module configurations. Additional modules can be purchased if they are compatible with the Soho Lighting Company's grid system and fit within the available gang spaces.
Ensure the power is on and that all wiring connections are secure and correct according to the diagram. Verify the switch module is correctly seated on the grid plate.
This typically indicates an issue with the 2-way or intermediate switching wiring. Double-check all connections to the switches and the light fitting. Consult an electrician if unsure.
Clean gently with a dry, soft cloth. Avoid harsh chemicals. If tarnish persists, a specialized brass cleaner for *unlacquered* brass may be cautiously used, but always test in an inconspicuous area first.
Ensure you are using compatible grid plates and that the modules are aligned correctly before attempting to snap them into place. For grid systems, ensure the retention clips are engaged properly.
Setup: This product requires installation by a qualified electrician. The switch modules (2 x 2-way, 1 x intermediate) are provided separately and must be assembled onto the grid plate by the installer. The installer will determine the optimal sequence for the switches based on the wiring plan and desired functionality. Ensure the power supply is switched off at the mains before commencing any electrical work.
Compatibility: Suitable for standard UK electrical wiring systems. The grid system is designed to work with compatible grid plates from The Soho Lighting Company. Always check wiring regulations and ensure compatibility with your existing electrical setup.
Care: To maintain the brushed brass finish, wipe clean with a soft, dry cloth. Avoid using abrasive cleaners or polishing compounds, as these can damage the finish. For stubborn marks, a slightly damp cloth can be used, followed immediately by drying with a soft cloth.
