Best current price£14.01from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.01Visit shop B&Q - Mtd Lawnflite Engine To Variable Speed Kevlar Lawnmower Drive Belt By
Visit shop1 offer from £14.01
View price history by clicking the chart icon.
Designed for owners of vintage MTD Lawnflite 500, 600, and 700 series lawnmowers, the Ufixt 754-0280 drive belt is a crucial replacement component for maintaining efficient variable speed drive system operation. It is ideal for DIY enthusiasts performing routine mower maintenance to restore power transmission from the engine to the transmission, though users should note it is specifically engineered for models produced between 1988 and 1997 and may not fit later production runs.
| Model Part Number | 754-0280 |
|---|---|
| Brand | Ufixt |
No, it is specifically designed for MTD Lawnflite 500, 600, and 700 series models produced between 1988 and 1997.
The belt measures 5/8 inch in width and 53 inches in length.
Yes, if you have basic mechanical tools and experience with mower maintenance, though it requires removing the mower deck for access.
Yes, this is a direct replacement part for OEM number 754-0280.
Signs include loss of ground speed, squealing noises, visible cracks or fraying on the belt, or the mower failing to move uphill.
Check the idler pulley spring tension and ensure the belt is routed correctly around the variable speed pulley.
Ensure the belt is not rubbing against the mower frame and that all pulleys are aligned and spinning freely.
Verify that the belt is seated properly on the engine drive pulley and not off the track due to insufficient tension.
Before beginning installation, ensure the lawnmower is on a flat, stable surface and the spark plug wire is disconnected for safety. To install: 1. Remove the mower deck to access the transmission area. 2. Release the tension from the spring-loaded idler pulley. 3. Remove the old belt, inspecting the pulleys for debris or rust. 4. Route the new Ufixt belt carefully, ensuring it sits deep into the grooves of the pulleys. 5. Re-apply tension and manually rotate the blades to ensure the belt tracks centrally. Avoid getting oil or grease on the belt surface, as this can cause premature slippage.
