Best current price£154.95from Tooled Up
Shopping.co.uk recommended and popular offers
Tooled Up£154.95Visit shop Bosch Professional Bosch Gca 30-42 / Gct 30-42 Wireless Auto Start Kit For Dust Extractors
Visit shop
B&Q£159.55Visit shop B&Q - Pro 110V Combo Kit Auto-Start Kit Gca 30-42 V Gct 30-42
Visit shop6 offers from £154.95 - £159.55
View price history by clicking the chart icon.
The Bosch Professional Auto-Start Kit (1600A02GF2) is for tradespeople using cordless tools with a dust extractor. Its key benefit is the wireless, automatic synchronization of your dust extractor with your power tool, which simplifies operation and improves dust control. A caveat is that it requires a compatible Bosch Professional tool or other power tools with sufficient vibration to trigger the sensor. This kit allows your dust extractor to automatically start and stop with your tool, enhancing efficiency and safety by ensuring dust is managed effectively.
| Model Part Number | 1600A02GF2 |
|---|---|
| Brand | Bosch |
The kit is compatible with most power tools that generate noticeable vibration during operation. Bosch Professional tools are generally well-suited. For other brands, ensure the tool has enough vibration to reliably trigger the Auto-Start tag sensor.
While specific range can vary based on environmental factors, the system is designed for effective communication within a typical workshop or job site area, ensuring the dust extractor is controlled when the tool is in use.
The kit is designed to work with dust extractors that have a standard power outlet socket for controlling the extractor via an external switch or signal. It's compatible with many models available on the market.
The dust extractor runs for a short, pre-set period after the tool stops to clear residual dust from the system and workspace, enhancing dust management.
The Auto-Start tag (GCT 30-42) is powered by the tool's vibration. The Auto-Start plug (GCA 30-42 V) is powered by the dust extractor.
The sender unit (GCT 30-42) has an IP54 protection rating, meaning it is protected against dust ingress and splashing water.
Verify that the Auto-Start tag and plug are correctly paired. Ensure the dust extractor is plugged into the Auto-Start plug and that the dust extractor itself is switched on. Check that the tool is generating sufficient vibration to trigger the sensor. Ensure the tool tag and extractor plug are within wireless range.
Check the pairing status. Some residual vibration from the tool might still be detected; allow a few extra seconds. If the issue persists, re-pair the devices.
Ensure the tool is securely attached to the Auto-Start tag. Obstructions or damage to the tag could affect vibration detection. Check battery levels of the tool if applicable, as low power might affect vibration.
Refer to the specific manual for error codes or sounds. Usually, this indicates a pairing issue, low battery (if applicable), or a potential malfunction. Try re-pairing the devices or contact customer support.
Setup:
Compatibility:
Care:
