LEE Filters Elements Little Stopper Circular Filter - 82mm

The main purpose is to reduce the amount of light entering your lens by 6 stops, allowing you to use much slower shutter speeds. This is ideal for creating motion blur in moving elements like water or clouds.

Yes, the 6-stop reduction makes it very effective even in moderately bright daylight, allowing for creative long exposures that would otherwise be impossible without faster shutter speeds.

You can technically stack it, but it's generally not recommended for wide-angle lenses as it can increase the risk of vignetting and potential light leaks or internal reflections. The filter itself is designed to offer excellent performance on its own.

Use the provided LEE filters cleaning cloth. For tougher spots, apply a small amount of lens cleaning fluid to the cloth (not directly to the filter) and gently wipe the glass. Avoid abrasive materials.

The LEE Elements Little Stopper filter comes with a limited lifetime warranty, covering manufacturing defects.

The LEE Elements Little Stopper is available in 67mm, 72mm, 77mm, and 82mm thread sizes to accommodate a range of lenses.

Yes, the significant light reduction can make autofocus systems struggle or fail. It is highly recommended to use manual focus after setting your desired composition and focus point.

Ensure your camera's exposure settings are adjusted to compensate for the 6-stop light reduction. Use a handheld light meter or test shots to dial in the correct shutter speed. Check that the filter is fully screwed in and not blocking any lens elements.

Manually focus your lens *before* attaching the filter. Autofocus systems often struggle with dense filters. Use your camera's live view and magnification for precise manual focusing.

This can occur with wide-angle lenses or when stacking multiple filters. Try using a lens with a larger thread size or consider using a filter system that allows for placement closer to the sensor. Ensure the filter is not too thick for your lens hood setup.

Ensure you are using the correct filter size for your lens. If it's stiff, check for any cross-threading or debris on the lens threads. Gentle, steady pressure is key. The knurled ring should provide adequate grip.

While the multi-layer coatings minimize this, a slight cast can occur. Adjust the white balance in your camera or during post-processing. Shooting in RAW format provides the most flexibility for color correction.