Best current price£25.38from B&Q
Shopping.co.uk recommended and popular offers
B&Q£25.38Visit shop B&Q - Hvlp Gravity Feed Spray Gun 1.4mm Nozzle 1/4" Bsp In Line Moisture Trap
Visit shop1 offer from £25.38
View price history by clicking the chart icon.
This AB Tools HVLP spray gun kit is designed for DIY enthusiasts and professionals seeking a reliable and versatile tool for painting projects. Its key benefit is achieving a smooth, even finish with various paint types, aided by the integrated moisture trap that ensures contaminant-free application. A potential caveat is the need for an adequate air compressor to operate efficiently. The kit includes a 600ml gravity feed spray gun with a 1.4mm nozzle and a 1/4" BSP inline moisture trap, ideal for automotive, furniture, and general-purpose spraying.
| Model Part Number | TE947_AT733 |
|---|---|
| Brand | AB Tools |
This spray gun is suitable for a wide range of paints, including primers, base coats, lacquers, enamels, and modern water-based paints. Always ensure the paint is properly thinned according to the paint manufacturer's instructions for optimal atomization with the 1.4mm nozzle.
The spray gun has an air consumption of approximately 8 CFM (Cubic Feet per Minute). Ensure your air compressor can consistently supply this volume of air at the required operating pressure.
The inline moisture trap filters out water, oil, and solid contaminants from your air supply. This is crucial for achieving a clean, professional paint finish by preventing defects caused by moisture or debris from the airline or compressor.
Immediately after use, empty and clean the cup with the appropriate solvent. Disassemble the fluid needle, nozzle, and air cap, and clean them thoroughly. Flush the gun with solvent until only clean solvent emerges. Refer to the care section for detailed steps.
The recommended air pressure is typically between 43-58 PSI (3-4 Bar), but it's best to consult the paint manufacturer's recommendations and the specific requirements for your application. The moisture trap is rated for up to 9.9 kg/cm² (approx. 140 PSI).
While the gun is versatile, the 1.4mm nozzle is best suited for standard paints. For very thick materials like some fillers or textured coatings, a larger nozzle size (e.g., 1.7mm or 2.0mm) might be more appropriate, or significant thinning will be required.
Warranty information is typically provided by the retailer or manufacturer at the time of purchase. Please refer to your product documentation or the seller's listing for specific warranty details.
Check for clogs in the nozzle, needle, or air cap. Ensure paint is properly thinned and mixed. Verify adequate air pressure and airflow from the compressor. Clean the moisture trap.
Increase air pressure slightly, ensuring it's within the gun's limits. Check that the nozzle and air cap are correctly aligned. Ensure paint is thinned to the correct viscosity.
Ensure the inline moisture trap is correctly installed and functioning. Drain the trap regularly. Check the compressor's air system for oil leaks or excessive condensation. Use a higher-quality air filter if necessary.
Check all connections for tightness. Inspect seals and O-rings for damage and replace if necessary. Ensure the air cap is properly seated.
Ensure the fluid needle is moving freely. Check that the cup is not overfilled and that the air vent on the cup lid (if applicable) is clear. Verify the feed tube is submerged in paint.
Setup:
Compatibility:
Care:
