Best current price£77.60from B&Q
Shopping.co.uk recommended and popular offers
B&Q£77.60Visit shop B&Q - Quad V-Pro Rotary 2-Way Led Dimmer 4 X 0-120WScrewless Brushed Brass With Polished Brass KnobJdbdp254S
Visit shop2 offers from £77.60 - £79.71
View price history by clicking the chart icon.
The Varilight Quad V-Pro Rotary 2-Way LED Dimmer is designed for homeowners and electricians seeking a sophisticated, reliable way to control four independent lighting circuits. Its standout benefit is the intelligent V-Pro technology, which ensures smooth dimming and compatibility across a wide range of LED bulbs; however, users should note that as a 4-gang unit, it requires specific wiring depth within the wall back box to accommodate its rear mechanism.
| Colour | Bronze |
|---|---|
| Model Part Number | Jdbdp254S |
| Brand | Varilight |
It is designed to be compatible with most dimmable LEDs, though performance can vary depending on the internal driver of the bulb. Always use lamps labeled as 'dimmable'.
Yes, the V-Pro technology is versatile and can handle incandescent and halogen loads, though the primary benefit is seen with LED lighting.
The dimmer features intelligent protection and will automatically shut down to protect the hardware. You must reduce the load and reset the unit.
Yes, the screwless faceplate clips onto the mounting frame for a clean, clean-lined look.
This product comes with a lifetime guarantee, reflecting the high manufacturing standards of the UK-based production process.
No, this is a standard 2-wire dimmer that installs into the live circuit line.
Access the dimmer's internal programming mode to increase the minimum brightness setting until the flickering stops.
This is likely the intelligent overload protection. Check that the total wattage of the bulbs on that circuit is within the rated capacity of the dimmer.
Ensure the second switch is a standard 'retractive' or 'toggle' switch compatible with 2-way dimming setups and that wiring is verified by a qualified electrician.
For optimal performance, ensure that the total wattage of your LED bulbs on each circuit does not exceed the dimmer's rating. Given the 4-gang nature of this device, a standard 25mm back box may be too shallow; a 35mm or 47mm depth back box is recommended to allow adequate space for the wiring terminals. During installation, always isolate the electrical supply at the consumer unit. To clean the bronze faceplate, avoid harsh chemical cleaners or abrasive pads; simply wipe with a soft, dry microfiber cloth to maintain the finish. If you change your lighting fixtures in the future, you may need to recalibrate the minimum brightness level via the dimmer's setup mode to ensure the LEDs maintain a stable dimming range.
