Best current price£27.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£27.50Visit shop B&Q - Hard Wax Oil Clear Satin Finish For Wood Floors Worktops & Furniture 1L
Visit shop
eBay£27.50Visit shop Rustins Hard Wax Oil Clear Satin Finish for Wood Floors Worktops & Furniture 1L
Visit shop4 offers from £27.50
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and homeowners looking to protect and enhance their wooden surfaces. The key benefit is achieving a natural, satin finish with excellent water and stain resistance. A potential caveat is that proper preparation of the wood is crucial for optimal results. Rustins Hard Wax Oil offers a durable, easy-to-apply solution that nourishes wood while providing a protective barrier. Key features include its clear satin finish, water and stain resistance, high solids content for better coverage, and long-lasting durability.
| Model Part Number | HWOIL1000 |
|---|---|
| Brand | RUSTINS |
For most surfaces, two to three thin coats are recommended. For high-traffic areas like floors or worktops, three coats will provide better durability and protection.
No, Rustins Hard Wax Oil is specifically designed for interior wood surfaces and is not suitable for exterior use as it does not offer sufficient weather protection.
The frequency of reapplication depends on usage. For heavily used items like floors or tables, a maintenance coat may be needed every 6-12 months. Less used items might only need it every few years.
No, it is best applied to bare, unfinished, or previously oiled wood. Applying it over paint or varnish will not adhere correctly and may peel or chip.
Drying time between coats is typically 4-6 hours, but this can vary depending on temperature, humidity, and the thickness of the application. Ensure the surface is dry to the touch before applying the next coat. Full cure can take up to 24 hours.
Hard wax oils contain both oils and waxes. The oils penetrate the wood to nourish and protect, while the waxes form a durable, protective layer on the surface, offering better resistance to wear and moisture compared to oil-only finishes.
Ensure the oil was applied thinly and evenly. If streaks are present, lightly sand the affected area with fine-grit sandpaper and reapply a thin coat, ensuring to even out the coverage. Make sure you are working the product into the wood and not just leaving it on the surface.
This can happen with some woods. Always test on an inconspicuous area first. If blotchiness occurs, you may need to apply a wood conditioner prior to the wax oil, or consider a different type of finish. For minor blotchiness, sometimes a further thin, well-rubbed coat can help even it out.
This usually indicates the oil was applied too thickly or did not have enough time to cure. Wipe off any excess oil with a clean cloth. Allow more time for drying in a well-ventilated area. In persistent cases, lightly sand and reapply a very thin coat.
The surface may not have received enough coats, or the coats were applied too thinly. Ensure at least two to three thin coats have been applied and allowed to cure fully. Reapply another thin coat if necessary.
Preparation is Key: Ensure the wooden surface is clean, dry, and free from dust, grease, and old finishes. Sand smooth if necessary, starting with a coarser grit and finishing with a fine grit sandpaper. Wipe away all dust with a tack cloth or a slightly damp cloth.
Application: Apply the wax oil thinly and evenly using a brush, cloth, or applicator pad. Work the oil into the wood grain. For best results, apply two to three thin coats, allowing adequate drying time between each. For floors and high-wear surfaces, a final buff with a clean, soft cloth or a buffing machine can enhance the sheen.
Compatibility: Suitable for all types of unfinished or previously oiled interior wood. Not recommended for use over existing varnishes or paints.
Care: Clean spills immediately with a damp cloth. For general cleaning, use a well-wrung-out mop or cloth. Avoid harsh detergents or abrasive cleaners. Reapply a maintenance coat of Rustins Hard Wax Oil as needed, typically once or twice a year depending on usage, to refresh and protect the surface.
