Taps2Traps Sink Trap - 1.5 Inch - Twin Appliance Nozzles - TTWM2

This trap is specifically designed for two appliances due to its twin spigot configuration.

It is designed for 1.5-inch diameter sink drain pipes.

No, the trap includes the sink trap body and fittings. Appliance hoses are sold separately.

It is recommended to check for leaks periodically, especially after initial installation and after significant appliance use.

Polypropylene is generally suitable for typical household hot water temperatures from washing machines and dishwashers. However, avoid prolonged exposure to extreme temperatures.

The 75mm water seal in the P trap creates a barrier of water that prevents sewer gases from rising through the drain and entering your home.

Ensure the tapered rubber seal, O-ring, and slip ring are correctly seated. Retighten the compression nut by hand until snug. If the leak persists, check for damage to the seal or pipe.

Verify the hose size is compatible with the spigot diameter. Use a hose clamp for a more secure fit if needed.

The P trap may have lost its water seal. Run water through the sink and appliances for a minute to refill the trap. Ensure the trap is correctly installed with adequate water seal depth.

Check the appliance spigots and the trap body for any obstructions or buildup of lint and debris. Disassemble and clean if necessary.