Trek FX+ 7 Midstep Electric Hybrid Bike - Green

The range depends on factors like terrain, rider weight, assist level, and pedaling effort. With the 360 Wh battery and TQ HPR50 motor, expect typical ranges from 30-60 miles (approx. 50-95 km) per charge. For precise figures, consult the TQ system's estimated range based on your riding conditions.

The battery can be charged either on or off the bike. Connect the provided charger to the battery's charging port and then plug the charger into a standard wall outlet. A full charge typically takes a few hours.

Yes, the Trek FX+ 7 Midstep is designed for all-weather riding. It features hydraulic disc brakes for reliable stopping in wet conditions, and the components are sealed to resist moisture. However, it's advisable to clean and dry the bike after riding in adverse weather.

The TQ HPR50 motor is designed to be low-maintenance. Keep the motor area clean from dirt and debris. Do not attempt to open the motor casing. Regular drivetrain maintenance is the most crucial aspect.

The FX+ 7 Midstep is considered supremely light for an e-bike, with the frame and motor weighing significantly less than many conventional e-bikes. Actual weight will vary by size, but it is designed for easier handling and maneuverability.

The MIK system allows for quick attachment and removal of MIK-compatible accessories such as pannier bags, child seats, and baskets. Check for the MIK logo on accessories to ensure compatibility.

Trek typically offers a limited lifetime warranty on the frame and a one-year warranty on components, including the battery and motor. Please refer to the official Trek warranty documentation for specific details and terms.

Ensure the battery is fully charged and correctly inserted into the frame. Check that the power button on the display unit has been pressed. If the issue persists, check the connection between the battery and the frame.

Verify that the bike's speed exceeds the minimum threshold for assist activation. Check if the assist level is set to 'Off' or a low setting. Ensure the speed sensor is clean and properly aligned with the magnet on the wheel.

Check the battery connection to the display unit. If the display is wet, allow it to dry completely. Try a full battery cycle (remove, wait a few minutes, reinsert).

Check brake pad wear and replace if necessary. Ensure rotors are clean and free of grease. If the levers feel spongy, the hydraulic brake system may need bleeding. Consult a professional bike mechanic.

Ensure the derailleur is not bent. Check the gear cable tension and adjust if needed. Clean and lubricate the chain and cassette. For persistent issues, consult a bike mechanic for a tune-up.