Setup, Compatibility & Care Instructions
Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. For previously painted surfaces, lightly sand and clean. For new or porous surfaces, apply a suitable primer.
Application: Stir the paint thoroughly before use. Apply evenly with a brush, roller, or sprayer. For best results, apply two coats, allowing adequate drying time between coats (typically 2-4 hours, depending on conditions). Maintain a wet edge to avoid lap marks.
Compatibility: Suitable for interior walls, ceilings, primed metal radiators, interior woodwork, and furniture. Do not use on floors or exterior surfaces.
Care: Clean spills and brushes immediately with water. For general cleaning of painted surfaces, use a soft, damp cloth with mild detergent if necessary. Avoid abrasive cleaners.