Shopping.co.uk

Connect Electrical Connector Injector Sensor To Suit Nissan - 2 Piece Set - 37577

Connect Electrical Connector Injector Sensor To Suit Nissan - 2 Piece Set - 37577

Connect Electrical Connector Injector Sensor To Suit Nissan 2 Piece Set - 37577. Popular Electrica...

Best current price£10.95from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

4 offers from £10.95 - £13.43

View price history by clicking the chart icon.

eBayConnect Electrical Connector Injector Sensor To Suit Nissan 2pc 37577
Free delivery in 1–3 days
£10.95
Visit shop

Product Information

Full details

This Connect Electrical Connector Injector Sensor set (37577) is designed for Nissan vehicle owners and mechanics needing to replace faulty or worn injector sensor connectors. Its key benefit is providing a direct, reliable replacement that restores proper sensor communication, ensuring optimal engine performance. A potential caveat is the need for specific wiring knowledge for installation. This 2-piece set includes connectors with 200 mm of pre-attached cable, serving as a direct replacement for OEM part 6189-6904.

All features

Model Part Number37577
BrandConnect

Extended Product Information

FAQs

What vehicles is this connector set compatible with?

This connector set is designed to suit Nissan vehicles and is a replacement for OEM part number 6189-6904. It is recommended to confirm your specific vehicle model and year.

Does this set include the sensor itself?

No, this product is a replacement connector set for the electrical injector sensor, not the sensor itself.

How long is the cable included with each connector?

Each connector in the 2-piece set comes with 200 mm of pre-attached cable.

What tools are needed for installation?

Basic automotive electrical tools are recommended, such as wire strippers, crimpers or a soldering iron, and heat shrink tubing or electrical tape for insulation.

Can I use this connector for other vehicle brands?

While it may have similar pin configurations, this connector is specifically designed and tested for compatibility with certain Nissan vehicles and their corresponding OEM part number.

What is the OEM part number this connector replaces?

This connector set replaces the OEM part number 6189-6904.

Troubleshooting

Engine misfires or rough idle after installation

Double-check all wire connections for security and correct polarity. Ensure all splices are properly insulated.

Check Engine Light remains on

Verify that the new connector is fully seated on the sensor. Re-scan for diagnostic trouble codes (DTCs) to confirm the specific fault.

Poor connection during splicing

Use appropriate crimping tools for a secure connection or solder the wires for maximum conductivity. Ensure no exposed wires after insulation.

Pros and Cons

Pros

  • Ensures proper injector sensor communication.
  • Simplifies repair with included cable.
  • Direct replacement for specific Nissan applications.
  • Helps resolve engine performance issues.
  • Cost-effective alternative to dealership parts.

Cons

  • Requires basic automotive electrical knowledge for installation.
  • Not a universal fit; specific to compatible Nissan models.
  • May require crimping or soldering for secure wire connection.

Setup, Compatibility & Care

Compatibility:

This connector set is specifically designed to suit Nissan vehicles and is an equivalent replacement for OEM part number 6189-6904. Always verify your vehicle's specific requirements and the original connector part number before purchasing.

Setup:

  1. Safety First: Disconnect the vehicle's battery before beginning any electrical work.
  2. Access Connector: Locate the existing injector sensor connector that needs replacement.
  3. Remove Old Connector: Carefully disconnect or cut the old connector, noting wire colors and their corresponding positions.
  4. Prepare Wires: Strip a small portion of insulation from the vehicle's wiring harness and the pre-attached cables on the new connector.
  5. Connect Wires: Crimp or solder the wires from the vehicle's harness to the corresponding wires on the new connector's cable. Ensure a secure and insulated connection for each wire.
  6. Install New Connector: Plug the new connector into the corresponding sensor.
  7. Reconnect Battery: Once all connections are secure, reconnect the vehicle's battery.

Care:

These connectors are designed for a permanent installation. Once properly installed, they require no routine maintenance. Avoid exposing the connections to excessive moisture or harsh chemicals. Ensure the connection remains secure and free from physical strain.

Price History

DatePrice
Visit shop