Best current price£19.96from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£19.96Visit shop Soho Lighting Black/Light Brushed Brass 20Ax 2 Way Lt3-Toggle Switch Module
Visit shop1 offer from £19.96
View price history by clicking the chart icon.
This Soho Lighting Toggle Switch Module in Brushed Brass (LT3) is designed for homeowners seeking flexible lighting control solutions within a stylish, screwless plate system. It allows for two-way switching, enabling a single light to be controlled from two locations, with the option to combine with other LT3 modules for custom configurations. A key caveat is its specific compatibility only with the LT3 Standard Toggle Switch Plates and not other Soho Lighting plate ranges.
| Series | LT3 |
|---|---|
| Model Part Number | SS-SH-00-SGP301-BB |
| Brand | The Soho Lighting Company |
A 2-way toggle switch allows you to control a single light or lighting circuit from two different physical locations. For example, you can turn a light on at the bottom of the stairs and off at the top.
No, this is a 2-way switch module. To control a light from three locations, you would need to use this 2-way switch in combination with an intermediate (or 3-way) switch module within the same LT3 plate system.
The finish is Brushed Brass, which offers a warm tone and is designed to hide fingerprints and small blemishes.
This module is specifically designed for and compatible only with LT3 Standard Toggle Switch Plates from The Soho Lighting Company.
Clean gently with a soft, dry cloth. For tougher marks, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners.
No, this is a module that fits into an LT3 Standard Toggle Switch Plate. The plate must be purchased separately.
Yes, due to electrical wiring, professional installation by a qualified electrician is strongly recommended for safety and correct operation.
Ensure the wiring is correct according to a two-way switching diagram. Verify that the module is properly seated in the LT3 plate and that the plate is correctly installed. Check the circuit breaker and ensure power is on.
This could indicate a wiring fault or an incompatibility issue. Consult a qualified electrician to re-check wiring connections and confirm compatibility with the light fixture and other switches in the circuit.
Confirm that you are using an official LT3 Standard Toggle Switch Plate. This module is not designed for other plate types. Ensure no debris is obstructing the module or plate housing.
Setup: Installation of this switch module requires electrical wiring knowledge and should be performed by a qualified electrician. It is designed to be inserted into a compatible LT3 Standard Toggle Switch Plate. Ensure power is disconnected before commencing any installation work.
Compatibility: This module is *exclusively* compatible with LT3 Standard Toggle Switch Plates from The Soho Lighting Company. It is *not* compatible with RM, CM, (RM+CM), EM, LT1, or LT2 plates. Verify that you are using the correct plate system to ensure proper function and safety.
Care: To maintain the finish, clean the module with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and then dry immediately with a soft cloth. Avoid using abrasive cleaners or polishes, as these can damage the brushed brass surface.
