Autotek Aerosol Spray Paint - Star Silver - 300ml

Autotek Quick Dry High Coverage Aerosol Spray Paint in Vauxhall Star Silver, 300mL. This paint pro...

Best current price£11.19from eBay

All Offers

4 offers from £11.19 - £12.99

View price history by clicking the chart icon.

eBayAutotek Quick Dry High Coverage Aerosol Spray Paint Vauxhall Star Silver 300mL
Free delivery in 1–3 days
£11.19
Visit shop
My Motor WorldAutotek Silver Vauxhall Star Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop

Product Information

Full details

This guide is for car owners and DIY enthusiasts looking for an exact colour match for Vauxhall vehicles manufactured between 1990 and 2001. The Autotek Star Silver aerosol spray paint offers a high-coverage, fast-drying solution for minor repairs and touch-ups, providing a professional finish. A key caveat is the requirement for a controlled application environment to achieve optimal results.

All features

ColourSilver
Model Part NumberMC137300
BrandAutotek
Container Volume300ml

Extended Product Information

FAQs

What Vauxhall models is this paint compatible with?

This paint is designed for Vauxhall models manufactured between 1990 and 2001 that originally featured the Star Silver paint color (Manufacturer Paint Code: 138, 88L, 88U).

How long does it take for the paint to dry?

The paint is touch dry within 10-20 minutes. Full curing takes approximately 24 hours.

Can I use this paint on different materials besides metal?

Yes, the paint contains protective properties that allow it to be applied effectively to metal, glass fibre, and rigid plastic surfaces.

What is the best way to prepare the surface before painting?

Clean the surface thoroughly to remove dirt, rust, and grease. Mask off the surrounding area and apply a minimum of two coats of primer for optimal adhesion and finish.

What temperature should I apply the paint in?

It is recommended to apply the paint in a temperature range between 15°C and 25°C.

Do I need to use a primer with this spray paint?

While not strictly mandatory for all applications, using a primer like Autotek Grey Primer is highly recommended for optimum adhesion and the best possible finish.

How do I prevent the nozzle from clogging?

After each use, turn the aerosol can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.

Troubleshooting

Paint is not spraying evenly or is sputtering.

Shake the can more vigorously. Ensure the nozzle is not blocked by attempting to clear it by spraying upside down. If the issue persists, the can may be faulty.

Uneven finish or 'orange peel' effect.

Ensure you are spraying from the correct distance (15-25cm) and applying thin, even coats. Do not apply too heavily. Check ambient temperature is within the recommended range (15°C-25°C).

Paint is not adhering well or is peeling.

The surface may not have been adequately cleaned or prepared. Ensure the surface is free from contaminants and that a primer was used for optimal adhesion, especially on plastics.

Colour match is not accurate.

Verify that you are using the correct paint code for your vehicle's year and model (Vauxhall Star Silver, codes: 138, 88L, 88U). Ensure the original paint has not faded significantly, which may affect the perceived match.

Nozzle blockage after use.

Always turn the can upside down and spray for 2-5 seconds after each use to clear the nozzle. If a blockage occurs, try soaking the nozzle in warm water and then clearing it with a fine pin.

Pros and Cons

Pros

  • Provides an exact colour match for specific Vauxhall models.
  • Fast-drying formula speeds up the repair process.
  • Offers protective qualities for enhanced durability.
  • Suitable for a variety of automotive surfaces.
  • Achieves a professional, high-quality finish.

Cons

  • Requires application in a controlled temperature environment (15°C-25°C).
  • Best results are achieved with prior primer application.
  • Requires good ventilation or outdoor use.
  • Specific model year compatibility (1990-2001) may limit wider use.
  • Masking is essential to prevent overspray.

Setup, Compatibility & Care

Preparation is crucial for the best results.

  1. Clean the Surface: Ensure the area to be painted is free from dirt, rust, grease, oil, and wax. A thorough degreasing is recommended.
  2. Masking: Use masking tape and paper to protect surrounding areas from overspray.
  3. Primer (Recommended): For best adhesion and finish, apply at least two coats of Autotek Grey Primer and allow it to dry completely.

Application:

  1. Shake Well: Shake the aerosol can vigorously for approximately 2 minutes before use.
  2. Spray Distance: Hold the can 15-25cm away from the surface.
  3. Coats: Apply thin, even coats. Allow 10-20 minutes between each coat.
  4. Nozzle Clearing: After each use, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
  5. Curing: Allow a full 24 hours for the paint to cure completely.

Environment: Only use outdoors or in a well-ventilated area. The ideal temperature range for application is between 15°C and 25°C.

Compatibility: This paint is compatible with most automotive paint finishes, including cellulose.

Care: Once fully cured, the painted surface can be cleaned using standard automotive cleaning products. Avoid abrasive cleaners directly on the newly painted area until fully hardened.

Price History

DatePrice
Visit shop