Best current price£18.35from eBay
Shopping.co.uk recommended and popular offers
eBay£18.35Visit shop Varilight JRP401 Classic Pewter 1 Gang 2 Way Push-On/Off LED Dimmer 0-120W V-Pro
Visit shop
B&Q£19.70Visit shop B&Q - Single V-Pro Rotary 2-Way Led Dimmer 1 X 0-120WClassic Pewter With Polished Chrome KnobJrp401
Visit shop3 offers from £18.35 - £24.67
View price history by clicking the chart icon.
The Varilight V-Pro Push On/off Rotary LED Dimmer in Grey is designed for homeowners looking to add flexible lighting control to their traditional interiors. It offers smooth dimming for a variety of bulb types, including dimmable LEDs and low-voltage halogens, with a maximum load capacity of 400W for incandescent bulbs. A key benefit is its compatibility with newer LED technology, allowing for precise light adjustment. However, users must ensure they use only *good quality dimmable LED bulbs* for optimal performance.
| Colour | Grey |
|---|---|
| Brand | Varilight |
The dimmer is designed to work with 1 to 10 good quality dimmable LED bulbs, provided the total load does not exceed the maximum load capacity (300W for Mains/Eco/LV Halogen, 400W for Incandescent).
No, this V-Pro dimmer is specifically designed for dimmable bulbs. Using non-dimmable bulbs will likely result in poor performance, flickering, or damage to the bulbs and/or dimmer.
The V-Pro dimmer requires a minimum load of 10W for optimal performance and to prevent issues like flickering.
It also supports Dimmable ESLs, Electronic Transformers, Trailing Edge, Standard Bulbs, GU10, and Mains Halogen bulbs.
Yes, it requires a standard 25 mm deep wall box for installation.
Clean the dimmer with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents to prevent damage to the finish.
The maximum load for Mains, Eco, and Low Voltage (L/V) Halogen bulbs is 300 Watts.
Check that the power supply to the circuit is on. Verify all wiring connections are secure and correct. Ensure the minimum load of 10W is met.
This usually indicates incompatible bulbs. Ensure you are using 'dimmable' LED or ESL bulbs and that they are of good quality. Try replacing one or more bulbs with a different compatible model. Check that the load does not exceed the maximum rating.
Confirm that the bulbs are compatible with leading edge dimming (typical for V-Pro). Ensure the bulbs are suitable for low-voltage halogen or dimmable LED/ESL use. Verify the minimum load requirement is met.
A slight warmth during operation is normal, especially under heavy load. If it feels excessively hot, turn off the power immediately and check the load and wiring. Ensure the load is within the specified maximum limits.
Setup:
Compatibility:
Care:
