Rhodius XT35 Cross - Cutting & Grinding Disc - Steel

The Rhodius XT35 Cross disc is designed for use on all types of steel, including high-alloyed and tensile steels.

Switch between cutting and grinding by changing the angle of the disc against the material. A steeper angle is generally used for cutting, and a shallower angle for grinding.

Always wear safety glasses, gloves, and a dust mask or respirator. Ensure the workpiece is securely clamped and that you are working in a well-ventilated area.

The lifespan of the disc depends on the material being cut and the frequency of use. Proper use and care will extend the disc's life.

The disc is 115 mm in diameter, with a thickness of 1.9 mm, and a bore diameter of 22.2mm.

This disc is designed specifically for steel. Using it on other materials may result in poor performance or damage to the disc.

Store the disc in a dry and safe place, away from extreme temperatures and moisture.

Check the angle of the disc against the material. Ensure you're using the correct technique for the task. Make sure the disc is not worn and is appropriate for the steel being cut.

Adjust the angle of the disc to optimize grinding. Make sure you apply appropriate pressure and that the disc isn't clogged with debris. If the disc is worn, replace it.

Make sure the disc is properly mounted and tightened. Check the angle grinder for any damage.