Best current price£5.02from eBay
Shopping.co.uk recommended and popular offers
eBay£5.02Visit shop Mirka Abralon 150mm 6"" P1000 Grit 1x HookNLoop Foam Fine Finishing Discs Pad
Visit shop5 offers from £5.02 - £40.80
View price history by clicking the chart icon.
The Mirka Abralon 150mm P1000 grit sanding discs are engineered for automotive, marine, and woodworking professionals who require a precision finish on complex, curved surfaces. These foam-based discs excel at providing a consistent, uniform sanding pattern that minimizes deep scratches, though they are specifically designed for fine finishing rather than aggressive material removal. By combining a flexible backing with high-quality abrasives, they allow for excellent conformability, making them an essential tool for achieving a professional-grade surface preparation.
| Model Part Number | 8A24102092 |
|---|---|
| Brand | Mirka |
Yes, they are excellent for fine sanding on wood, particularly when sanding between coats of paint, varnish, or lacquer.
Yes, Abralon discs are specifically designed to be used both wet and dry, which is a significant advantage for automotive finishing.
These are 150mm (6-inch) discs and should be used with a matching 150mm hook and loop backing pad.
P1000 is a fine grit intended for surface refinement; it will not efficiently remove deep gouges. You should use a coarser grit first if deep damage is present.
The disc is worn when the abrasive particles become clogged or the cutting action noticeably slows down, despite cleaning efforts.
No, let the abrasive do the work. Excessive pressure can damage the foam backing and lead to uneven sanding results.
Ensure both the pad and the disc are clean of dust and debris, and press the disc firmly across the entire surface to engage the hook and loop fasteners.
Reduce the RPM of the sander, apply less downward pressure, or switch to a wet sanding method to dissipate heat.
Avoid contact with sharp edges or corners, and reduce the speed of the sander when working near edges of a panel.
To ensure the best performance, mount the Abralon disc centrally on a clean 150mm hook and loop backing pad. Before starting, verify that your sander is set to a moderate speed to prevent heat buildup, which can melt the foam backing or soften the finish you are working on.
For maintenance, if the disc becomes clogged during dry sanding, use a cleaning stick or lightly blow it out with compressed air. If using for wet sanding, rinse the disc periodically with clean water to remove residue. Store the discs in a cool, dry place away from direct sunlight, and ensure they are laid flat to prevent the foam from deforming over time.
