Scan 6003 Gentlemen - Polished Brass Effect 200 x 50mm

The sign features a polished brass effect finish printed with UV resistant inks on a durable substrate. The exact base material is not specified but is designed for indoor use.

The sign measures 200mm in width and 50mm in height (200 x 50mm).

While printed with UV resistant inks, the self-adhesive backing is primarily designed for indoor use on clean, smooth surfaces. Extended outdoor exposure may affect adhesion and durability.

It adheres best to smooth, clean, and dry surfaces such as painted walls, metal, glass, and finished wood. Avoid textured or porous surfaces.

To remove, gently try to peel an edge. If it's difficult, you can use a hairdryer on a low heat setting to warm the adhesive, then carefully peel it away. Residual adhesive can often be removed with a mild adhesive remover.

No, it is a polished brass *effect* finish, designed to mimic the look of polished brass.

Basic application instructions are usually provided with the product, and detailed guidance on setup and care can be found in comprehensive guides like this one.

Ensure the surface was thoroughly cleaned and dried before application. Reapply pressure to the sign, paying close attention to the edges. If adhesion remains poor, consider using a mild adhesive promoter (test in an inconspicuous area first) or a suitable double-sided tape designed for signage.

If bubbles appear during application, gently lift the sign before it's fully adhered and re-smooth it onto the surface. For existing bubbles, you can try to carefully puncture them with a fine needle and press the air out.

While printed with UV resistant inks, extreme or prolonged direct sunlight could eventually cause fading. Ensure the sign is not placed in direct, intense sunlight for extended periods. If fading occurs, the sign may need replacement.