Outdoor Revolution Caravan Awning Universal Cassette Storm Tie Down Kit

Insert the pegs into the ground at an angle, using a mallet or similar tool to drive them in firmly. Ensure that they are secure and can withstand pulling forces.

This kit is designed to attach to most awnings, however, if your awning lacks tie-down points, consider using alternative anchoring methods suitable for your awning design. Always check the awning manufacturer's guidelines.

Rinse the webbing straps with fresh water after each use and allow them to air dry completely before storing. Regularly check for signs of wear and tear, such as fraying or damage.

While the kit is designed for a variety of ground conditions, very soft ground may require the use of longer pegs or alternative anchoring methods to ensure secure attachment. Consider using ground anchors specifically designed for softer surfaces.

The straps should be taut but not overly tight. The shock-absorbing springs should have some give to absorb sudden gusts of wind without overstressing the awning fabric or the anchors. A slight give is normal.

The weight of the Outdoor Revolution Tie Down Kit is 1.04kg.

Check that the anchor pegs are firmly inserted into the ground at an angle. Ensure that the straps are taut and properly attached to the awning's tie-down points.

Ensure that you are using both strap lengths (66cm and 3m) to accommodate different anchoring distances. If the provided straps are consistently too short, you may need to use additional straps.

Ensure the springs are correctly installed and free from obstruction. Check for any damage or degradation of the spring's flexibility.

Try using pegs that are suitable for the ground condition (e.g., sand pegs, rock pegs, etc.). Relocate the peg to a more suitable location, making sure to drive the pegs in at an angle.