ENGINE OIL LEVEL SENSOR FOR JAGUAR - D2P - 9X2Q6C624BA
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Engine Oil Level Sensor by D2P is designed for specific Jaguar models (XF, XJ) with 3.0 D 2993cc engines. It ensures accurate monitoring of your vehicle's oil levels, providing a key benefit of preventing engine damage due to low oil. A potential caveat is its specific fitment, requiring verification against your vehicle's make, model, and engine code. Key features include a 12V voltage rating and direct compatibility with specified Jaguar platforms.
All features
| Model Part Number | 9X2Q6C624BA |
|---|---|
| Brand | D2P |
Extended Product Information
FAQs
How do I know if my Jaguar needs a new oil level sensor?
Common signs include an illuminated oil level warning light on the dashboard that does not correspond to the actual oil level (check via dipstick or oil level check procedure), or intermittent incorrect readings.
What is the voltage requirement for this sensor?
This D2P Engine Oil Level Sensor operates on a 12V electrical system, which is standard for compatible Jaguar vehicles.
Can I use this sensor on a Jaguar with a different engine size?
No, this sensor (9X2Q6C624BA) is specifically designed for the Jaguar 3.0 D 2993cc engine (306DT/AJTDV6). Using it on a vehicle with a different engine may result in incorrect readings or component failure.
What does 'RWD' mean in the compatibility list?
RWD stands for Rear-Wheel Drive, indicating the specific drivetrain configuration of the Jaguar models this sensor is compatible with.
Does this sensor come with a new seal or gasket?
The product information does not specify if a new seal or gasket is included. It is advisable to check the product packaging upon arrival or consult the supplier to confirm.
How often should the engine oil level sensor be replaced?
The engine oil level sensor is an electronic component and does not have a fixed replacement interval. It should be replaced only when it fails or starts providing inaccurate readings.
Where is the oil level sensor located on my Jaguar XF/XJ?
The oil level sensor is typically located at the bottom of the engine's oil sump. The exact position may vary slightly depending on the specific model year and engine.
Troubleshooting
Oil level warning light remains on after sensor replacement
Ensure the new sensor is correctly seated and the electrical connector is securely attached. Check the engine oil level and top up if necessary. If the issue persists, there might be a problem with the vehicle's wiring harness or the Engine Control Unit (ECU).
Inaccurate oil level readings (showing too high or too low)
Verify the sensor is the correct part for your vehicle's specific make, model, and engine. Ensure there are no obstructions around the sensor in the oil sump. A faulty sensor may need replacement.
Sensor leaks oil after installation
The sensor may not have been tightened sufficiently, or the mounting surface on the oil sump might be damaged. Remove the sensor, inspect the mounting surface for damage, and reinstall the sensor ensuring it is tightened to the correct torque specification. Replace the mounting seal if necessary.
Pros and Cons
Pros
- Ensures accurate engine oil level readings.
- Designed as a direct replacement for specific Jaguar models.
- Helps prevent potential engine damage from low oil levels.
- Reliable 12V operation.
- Durable construction for engine bay environments.
Cons
- Limited compatibility, only fits specific Jaguar models and engines.
- Requires precise identification of vehicle's engine code for correct fitment.
- Installation may require professional automotive knowledge.
- Sensor failure can lead to inaccurate readings if not replaced promptly.
Setup, Compatibility & Care Instructions
Compatibility: This D2P Engine Oil Level Sensor, part number 9X2Q6C624BA, is specifically designed for the following Jaguar vehicles with a 3.0 D 2993cc 177KW 241HP engine (306DT/AJTDV6) RWD:
- Jaguar XF Diesel Estate (X250): 2012-2014
- Jaguar XF Saloon (X250): 2012-2014
- Jaguar XF Sportbrake (X250): 2012-2014
- Jaguar XJ Saloon (X351): 2010-2015
*Always verify your vehicle's exact engine code and model year before purchase to ensure correct fitment.*
Setup:
- Ensure the engine is completely cool before starting.
- Safely jack up the vehicle and secure it with jack stands.
- Locate the oil sump and the existing oil level sensor.
- Disconnect the electrical connector from the old sensor.
- Carefully unscrew and remove the old sensor.
- Clean the mounting surface on the oil sump.
- Screw in the new D2P Engine Oil Level Sensor until snug. Do not overtighten.
- Reconnect the electrical connector.
- Lower the vehicle.
- After filling with the correct amount of engine oil, start the engine and check for leaks. Allow the engine to run for a few minutes, then turn it off and check the oil level via the dashboard display to confirm the new sensor is functioning correctly.
Care:
This is a sealed electronic component. It requires no regular maintenance. Protect the sensor and its electrical connector from excessive dirt, moisture, and impact during vehicle maintenance.
*Installation is recommended by a qualified automotive technician if you are not experienced with vehicle repairs.*