Best current price£26.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£26.99Visit shop B&Q - 200X250mm Access Panel Magnetic Tile Frame Steel Wall Inspection Masking Door
Visit shop2 offers from £26.99 - £35.62
View price history by clicking the chart icon.
The Awenta MPCV magnetic access panel is designed for homeowners and contractors who require a clean, unobtrusive way to access wall-recessed plumbing or electrical components. Its primary benefit is a near-invisible aesthetic, as the steel plate is designed to be covered with your existing wall tiles, allowing it to blend seamlessly into any bathroom or kitchen backsplash. One caveat is that the success of the finish depends on your ability to accurately apply matching tile adhesive or silicone to the plate, ensuring the panel is flush with the surrounding wall.
| Model Part Number | A029e |
|---|---|
| Brand | Awenta |
This model is designed specifically for wall installations. Using it on a ceiling is not recommended as gravity may compromise the magnetic hold.
It is designed for standard ceramic tiles. Excessive weight from stone or thick porcelain tiles may cause the magnets to fail.
The panel is designed to be removed by hand; simply apply pressure to one edge to overcome the magnetic force and pull the plate away.
The PVC frame is resistant to moisture, but the seam between the tile and the wall should be sealed with waterproof silicone if used in a wet room.
Yes, but the frame is designed for a tile joint finish. Painting the PVC will make the inspection point more visible than if it were tiled.
Check that the movable magnets are properly aligned with the steel frame and ensure there is no debris preventing a flat magnetic contact.
Ensure the surface of the steel plate is cleaned with degreaser before application and use a silicone-based adhesive suitable for bonding metal to ceramic.
To install, ensure your wall opening is clean and square. Secure the PVC frame into the opening using mortar or appropriate adhesive. Once the frame is set, apply a thin layer of adhesive to the steel plate and press your chosen tile firmly into place, ensuring alignment with the existing grout lines. Avoid using excessive weight on the plate, as this may impact the magnetic connection. For maintenance, keep the magnets free of debris or dust buildup, as foreign objects can weaken the grip. If the plate becomes loose over time, check the magnet positioning to ensure they are making full contact with the frame metal.
