The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when support...The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. With an adjustable working height, the feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. Supplied in a hardwearing storage bag to provide added protection. These props MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Specification Working Height: 1600-2900mm. Max. Working Load: Vertical: 60kg, @45: 20kg.
Faithfull Light Adjustable Dry Lining Support Props£8.95 delivery£96.95Visit shop →
Product Information
Full details
This guide is for anyone using the Faithfull Adjustable Support Props, ideal for supporting ceiling boards and sheet materials during overhead fixing. The props offer an adjustable working height to suit various needs. However, it's crucial to remember these props are designed for temporary support and should not be used as a replacement for permanent structural support.
All features
Model Part Number
FAIPROP1600
Brand
Faithfull
Extended Product Information
FAQs
What is the maximum working height?
The maximum working height is 2.9 meters.
What is the maximum working load?
The maximum working load is 60kg vertically and 20kg at a 45-degree angle.
Are these props suitable for supporting heavy loads for extended periods?
No, these props are designed for temporary support during installation. They are not suitable for heavy loads or long-term structural support.
How do I adjust the height of the props?
Loosen the locking mechanism, extend the prop to the desired height, and then tighten the locking mechanism securely.
What should I do if the feet aren't level?
The feet swivel to accommodate sloping or uneven surfaces. Adjust them until they provide a stable base.
How do I store the props?
Store the props in the hardwearing storage bag provided to protect them from damage.
Troubleshooting
Prop won't extend to the desired height.
Check that the locking mechanism is loose enough to allow extension. Ensure no obstructions are preventing the prop from extending.
Prop is unstable.
Ensure the feet are properly positioned on a stable surface and that the swiveling feet are adjusted to provide maximum contact. Check the locking mechanism.
Prop is slipping.
Make sure the prop is not overloaded. The supporting surface should be clean and clear of any debris or obstructions.
Pros and Cons
Pros
Adjustable height for versatility.
Swiveling feet improve stability on uneven surfaces.
Helps with overhead fixing tasks, saving time and effort.
Comes with a storage bag for added convenience and protection.
Easy to set up and use.
Cons
Not suitable for supporting heavy loads over extended periods.
Maximum working load is 60kg vertically, limiting use for very heavy materials.
Requires careful adjustment to ensure proper support.
Limited to overhead applications.
Setup, Compatibility & Care
Setup:
Extend the prop to the desired height.
Ensure the feet are securely placed against a stable surface and the ceiling/overhead material.
Adjust the feet to accommodate any slopes or unevenness.
Tighten the locking mechanism.
Compatibility:
Compatible with a wide range of ceiling boards and sheet materials, provided the total weight does not exceed the maximum load capacity.
Suitable for use on various surfaces, thanks to the swiveling feet.
Care:
Wipe down the props after each use to remove any dust or debris.
Store them in the provided storage bag when not in use.
Regularly check for any signs of wear and tear, and replace props if necessary.
Do not exceed the maximum working load of 60kg vertically and 20kg @45°.