Best current price£11.35from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£11.35Visit shop Liberon Black Bison Wax Paste Tudor Oak 500Ml 126880
Visit shop
The Range£16.90Visit shop Liberon Black Bison Wax Paste Tudor Oak 500Ml - Nourishing Wood Finish - 126880 - Tudor Oak
Visit shop8 offers from £11.35 - £18.00
View price history by clicking the chart icon.
The Liberon Black Bison Wax Paste in Tudor Oak is designed for woodworkers and furniture enthusiasts seeking to nourish, protect, and enhance the natural beauty of various wood surfaces, including those with existing lacquers or French polishes. Its key benefit is providing a durable, water-resistant, and fingerprint-proof finish that also highlights wood grain and can mask minor imperfections. A key consideration is its interior-use-only application and the need for specific tool cleaning agents.
| Model Part Number | 126880 |
|---|---|
| Brand | Liberon |
While it can be used on some painted surfaces, it is primarily designed for wood. Test on an inconspicuous area first. It is not recommended for distressed or chalk paint finishes without proper sealing.
The coverage is approximately 10-12 square meters per liter, depending on the porosity of the wood and the thickness of the application.
The minimum dry time is 20 minutes. However, for best results, allow ample time for curing, especially before applying subsequent coats or using the furniture heavily.
Yes, it provides good protection, but for very high-wear surfaces like kitchen worktops, frequent reapplication may be necessary. Consider a more robust finish if extreme durability is required.
No, this product is strictly for interior use only. It will not withstand exposure to weather elements.
Tools should be cleaned immediately after use with Liberon White Spirit.
The Tudor Oak shade will impart a warm, slightly tinted tone to the wood. It enhances the natural color rather than drastically altering it. Always test on a small area first to see the effect on your specific wood type.
Ensure the wax was applied in a thin, even coat. Buff thoroughly with a clean, soft cloth after drying. If streaks persist, you may need to lightly sand with fine steel wool and reapply a thinner coat.
This usually indicates the wax was applied too thickly or there isn't enough ventilation. Try buffing more vigorously or applying a very thin coat of a suitable solvent (like White Spirit) and buffing it off. Ensure adequate drying time in a well-ventilated area.
The surface may not have been buffed vigorously enough, or a second coat is needed. Ensure you are using a clean, soft buffing cloth and buff in firm, circular motions until the desired sheen is achieved. A second thin coat may enhance the shine.
The protective layer may be too thin. Apply a second or even a third thin coat of wax, ensuring adequate drying time between coats. Regular reapplication will maintain protection.
Application: Ensure the wood surface is clean, dry, and free from old finishes or contaminants. Apply a thin, even coat using a soft cloth, brush, or fine steel wool in the direction of the wood grain. Allow a minimum of 20 minutes for the wax to dry. Buff with a clean, soft cloth to achieve a high sheen. For heavily worn areas or to fill scratches, apply a second coat after the first has dried.
Compatibility: Ideal for all types of wood, including those with existing lacquers, French polishes, and raw wood finishes. It is safe for use on children's toys. Avoid use on exterior surfaces or in areas of high moisture.
Care: Clean tools immediately after use with Liberon White Spirit. Store the wax paste in a cool, dry place, away from direct sunlight. Periodically reapply the wax to maintain protection and appearance.
