Queen Anne Wooden Legs - Chestnut Wash - 200Mm High

These Queen Anne legs are versatile and can be used on a wide variety of furniture including sofas, chairs, settees, beds, footstools, cabinets, tables, bookcases, and drawers.

The most accurate way is to test which size nut (M6, M8, or M10) fits the existing bolt on your furniture. A tape measure is not reliable for thread size. If M8 fits, it's M8. If M8 is too small, try M10. If M8 is too big, try M6.

The self-fixing legs are designed for 6mm wood screws. These screws are typically not included, as users may have specific types or lengths required for their furniture.

The Queen Anne Wooden Legs in this model are 200mm high.

While the Chestnut Wash finish is attractive, you can lightly sand and re-stain or paint the legs to match your specific decor if desired. Ensure proper preparation for adhesion.

Clean the legs with a soft, slightly damp cloth. Avoid using harsh chemicals or abrasive cleaning materials that could damage the finish.

The product information does not specify a weight capacity. Ensure they are attached securely to furniture and that the furniture itself is structurally sound to support the intended load.

Ensure the correct bolt size (M6, M8, or M10) was used and is fully tightened. For self-fixing legs, check that wood screws are securely fastened into the furniture base and that the surface is flat.

Try fitting M6, M8, and M10 nuts onto the existing furniture bolt. The nut that screws on easily and securely indicates the correct size. If still unsure, consult a local hardware store or contact customer support with details of your furniture.

Ensure you are using appropriate 6mm wood screws for the material. Pre-drilling pilot holes slightly smaller than the screw diameter can help create a stronger anchor point and prevent wood splitting.

Contact the seller immediately with photographic evidence. Minor variations in wood grain or finish are normal, but significant damage should be addressed before installation.