Sealey Anti-Vibration Foot Kit - COMPKIT4

The kit includes M10x20 bolts.

No, these anti-vibration feet are designed specifically for static workshop compressors.

A standard kit typically includes four anti-vibration feet, enough for most compressors.

Yes, the feet are designed to protect surfaces, including wood, by absorbing vibrations and preventing movement. Ensure the workbench itself is stable.

The primary benefits are minimizing noise and vibration during compressor operation, and protecting your workshop floor from damage.

Clean them with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the rubber material.

They significantly reduce movement by dampening vibrations and providing a stable base. However, extreme forces could still cause some minor shifting; ensuring the compressor is correctly mounted and on a level surface is important.

Ensure all nuts and bolts securing the feet are tightened properly. Check that the compressor is on a level surface. For very heavy-duty or older compressors, the vibration may be inherent to the unit itself, and while reduced, may not be eliminated entirely.

Double-check the bolt size and washer compatibility with your compressor's mounting holes. Ensure you are using the correct hardware provided in the kit. If the mounting points are significantly different, this kit may not be suitable for your specific model.

This is uncommon with proper use. Ensure you are not exposing the feet to harsh chemicals or excessive heat. If degradation is noted, consider replacing the feet to maintain optimal performance and safety.