Best current price£7.44from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.44Visit shop B&Q - Pozidriv Double Self-Countersunk Yellow-Passivated Steel Wood Screw (Dia)6mm (L)100mmPack Of 20
Visit shop1 offer from £7.44
View price history by clicking the chart icon.
This pack of 20 yellow zinc plated double countersunk Pozidriv wood screws from TurboDrive is for DIY enthusiasts and professionals needing reliable fastening solutions for wood projects. The key benefit is their durable steel construction and yellow zinc plating for corrosion resistance, ensuring a strong and lasting hold. A caveat to consider is their specific Pozidriv head type, requiring the correct driver bit for optimal use. These premium screws are 100mm in length with a 6mm diameter, designed for a secure fit in various woodworking applications.
| Colour | Yellow |
|---|---|
| Brand | TurboDrive |
Pozidriv screws have four additional 'ribs' or slots at a 45-degree angle to the main cross slots, providing better engagement and reducing the chance of cam-out (the driver slipping out of the head) compared to Phillips screws.
No, it is strongly advised not to use a Phillips bit. While it might fit loosely, it can easily strip the Pozidriv head, making it difficult or impossible to drive or remove the screw.
The yellow zinc plating offers good corrosion resistance, making them suitable for protected outdoor applications like furniture or structures not constantly exposed to rain or harsh weather. For highly exposed conditions, stainless steel screws are recommended.
These screws are ideal for a wide range of woods, including softwoods like pine and hardwoods like oak. For very hard woods, drilling an appropriate pilot hole is recommended.
Drilling a pilot hole that is slightly smaller than the screw's shank diameter will significantly reduce the risk of splitting, especially when working near the edge of the wood or with brittle materials.
It means the underside of the screw head is shaped to recess itself into the wood, creating a smooth, flush surface once installed, which is beneficial for aesthetic finishes.
Ensure you are using the correct Pozidriv (PZ) bit and that it is fully seated in the screw head. Apply firm, steady pressure and avoid excessive speed. If already stripped, you may need to use screw extractors or cut a new slot.
Drill a pilot hole, especially in dense wood or near edges, to guide the screw. Ensure the screwdriver bit is aligned perpendicularly with the screw head.
Check if the wood is too soft or if the pilot hole is too large. Ensure the screw is long enough for adequate penetration into the supporting material. Consider using a slightly larger diameter screw if the wood is very soft.
This indicates the screw has been exposed to excessive moisture or corrosive elements beyond its intended use. For future projects in harsh environments, consider stainless steel or specialized coated screws.
Setup:
Compatibility:
Care:
