Shopping.co.uk

Clarke CCL2250 2.25 Tonne Car Lift

Clarke CCL2250 2.25 Tonne Car Lift

The Clarke CCL2250 2.25 Tonne Car Lift offers a solution for garages, workshops and racers to unde...

Best current price£1,337.15from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £1,337.15 - £1,499.99

View price history by clicking the chart icon.

Power Tools DirectClarke Ccl2250 2.25 Tonne Car Lift
£249.99 delivery
£1,337.15
Visit shop
eBayCLARKE CCL2250 2.25 TONNE CAR LIFT OIL SUPPLIED This is the genuine article
Free delivery in 1–3 days
£1,499.99
Visit shop

Product Information

Full details

The Clarke CCL2250 2.25 Tonne Car Lift is designed for home garages, workshops, and racers needing convenient access for vehicle maintenance like tyre changes and oil servicing. Its key benefit is the open-centre design providing quick wheel-free convenience and clear undercarriage access, eliminating the need for additional jacks or stands. A caveat to note is that this lift is suitable for most UK cars up to 2.25 tonnes, and the vehicle itself is not included.

All features

BrandClarke

Extended Product Information

FAQs

What is the maximum weight the CCL2250 can lift?

The Clarke CCL2250 has a maximum safe load capacity of 2.25 Tonnes, which is equivalent to 2268 kg.

Does the lift come with a power cord?

The CCL2250 includes a corded remote control for operation, which connects to the pump unit. You will need to ensure it is plugged into a suitable 230V power source.

What type of hydraulic fluid is required?

The lift requires ISO-15 hydraulic fluid. Approximately 2 litres are needed for the system.

Can this lift be used outdoors?

The lift is designed for garage and workshop use. While it has an operating temperature range of -20°C to +50°C and an IP55 ingress protection rating, prolonged outdoor exposure is not recommended due to potential environmental factors affecting longevity.

How are the safety locks activated?

The automatic safety locks engage automatically as the car lift is raised, providing continuous security during operation.

What is the minimum height the lift can be lowered to?

The minimum table height for the Clarke CCL2250 is 75 mm.

Is the vehicle included with the car lift?

No, as stated in the product description, the CAR IS NOT INCLUDED.

Troubleshooting

Lift will not raise

Check the power connection is secure and the outlet is functional. Verify the hydraulic fluid level is adequate. Ensure safety locks are fully disengaged.

Lift rises unevenly

Check the hydraulic flow divider for blockages. Ensure the vehicle is positioned centrally on the lift. Inspect hydraulic hoses for damage or leaks.

Safety locks not engaging

Inspect the locking mechanism for obstructions or damage. Consult the manual for specific lock reset procedures. Contact customer support if issues persist.

Slow lifting speed

Check hydraulic fluid level and condition. Ensure the power supply is adequate. Clean any potential filters or strainers in the hydraulic system.

Hydraulic fluid leak

Identify the source of the leak (e.g., hose connection, seal). Tighten connections or replace damaged seals/hoses. Top up fluid level after repair.

Pros and Cons

Pros

  • Provides excellent undercarriage access for maintenance.
  • Automatic safety locks enhance user safety.
  • Durable steel construction for long-term use.
  • Convenient operation with a simple corded remote.
  • Suitable for a wide range of common vehicle tasks.

Cons

  • Limited to vehicles up to 2.25 tonnes.
  • Requires a 230V power supply.
  • Requires space for setup and operation.
  • Potential for hydraulic fluid leaks if not maintained.
  • Not suitable for all types of vehicles (e.g., very low sports cars without modification).

Setup, Compatibility & Care

Setup:

  1. Ensure the lift is placed on a flat, level, and solid surface capable of supporting the weight.
  2. Connect the pump unit to the lift frame using the provided hydraulic hoses.
  3. Connect the pump unit to a 230V, 50Hz power supply (minimum 5.5A current recommended).
  4. Fill the hydraulic reservoir with 2 litres of ISO-15 hydraulic fluid.
  5. Test the lift with a light load to ensure smooth operation and proper engagement of safety locks.

Compatibility:

  • Vehicle Weight: Suitable for most UK cars up to 2.25 Tonnes (2268 kg).
  • Power Supply: Requires a standard 230V, 50Hz electrical outlet.

Care:

  • Regular Inspection: Periodically inspect all hydraulic hoses, connections, and the lift structure for wear or damage.
  • Lubrication: Lubricate moving parts as per the manufacturer's recommendations.
  • Cleaning: Clean the lift with a damp cloth. Avoid using abrasive cleaners.
  • Hydraulic Fluid: Check the hydraulic fluid level regularly and top up with ISO-15 fluid as needed. Replace fluid annually or as recommended.
  • Safety Locks: Ensure safety locks are tested regularly and function correctly.

Price History

DatePrice
Visit shop