Best current price£4.37from The Range
Shopping.co.uk recommended and popular offers
The Range£4.37Visit shop Unifix Twinthread Woodscrews Pozi Round Head Bzp 6G X 5/8" (3.5 X 16Mm) 9Tqtqrndpz/031 Box Of 200 - Grey
Visit shop40 offers from £4.37 - £6.78
View price history by clicking the chart icon.
These Unifix Twinthread Woodscrews are ideal for DIY enthusiasts and professionals seeking reliable fasteners for various wood projects. Their high-quality twinthread design ensures an enhanced grip, while the Pozi round head allows for easy installation with standard drivers. A potential drawback is their specific size, which may not be suitable for all applications without pre-drilling. This guide covers their features, use, and care.
| Model Part Number | 9Tqtqrndpz/011 |
|---|---|
| Brand | Unifix |
You will need a Pozi drive screwdriver or bit, typically a PZ1 or PZ2, to match the recess in the screw head.
The zinc-plated finish offers some corrosion resistance, making them suitable for dry indoor environments. For prolonged outdoor exposure or wet conditions, screws with a more durable coating like stainless steel or exterior-grade finishes are recommended.
The twinthread design provides a more aggressive pitch and deeper threads, which results in enhanced grip and superior holding power in wood compared to single-thread screws.
While they can be used with drywall anchors, these screws are primarily designed for fastening into wood. For direct drywall fastening, specific drywall screws are usually more appropriate.
Drive the screw straight and avoid overtightening. The round head will sit on the surface; if a flush finish is required, you may need to pre-countersink the wood slightly.
This refers to the screw's gauge and length. '4G' is a traditional gauge size, and '1/2"' is the length in inches. The metric equivalent is approximately 3.0mm diameter and 12mm length.
Ensure you are using the correct Pozi (PZ) drive bit. Apply firm downward pressure while turning slowly. If the head is already damaged, consider using screw extractors.
Check if the wood is too soft or if the pilot hole is too large. For softer woods, try using a screw without a pilot hole or with a smaller pilot hole. Ensure the screw is driven fully into the material.
Always pre-drill a pilot hole, especially in hardwoods or near the edge of the wood. The pilot hole should be slightly smaller than the screw's shank diameter.
These screws feature a round head which may not countersink fully. For applications requiring a flush finish, consider countersinking the wood slightly before insertion, or opt for screws with a countersunk head profile.
Setup:
Compatibility:
Care:
