Best current price£9.41from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£9.41Visit shop Pbsl Group Drainage Junction Triple Socket - 45 Degree X 110Mm
Visit shop
B&Q£122.73Visit shop B&Q - Drainage Junction Triple Socket 45 Degree X 110mmPack Of 12
Visit shop3 offers from £9.41 - £122.73
View price history by clicking the chart icon.
The PBSL Group 110mm Triple Socket 45-Degree Drainage Junction is designed for professional contractors and DIY enthusiasts who need to reliably join two pipe runs within an underground drainage network. This Y-junction excels at maintaining efficient flow and structural integrity in wastewater systems, though it is specifically sized for 110mm piping, making it incompatible with smaller or larger diameter systems without appropriate adapters.
| Model Part Number | UY110T |
|---|---|
| Brand | PBSL Group |
Yes, this fitting is suitable for standard gravity-fed drainage systems, including both wastewater and surface water drainage.
The 45-degree angle helps maintain the momentum of waste materials and prevents blockages at the junction point.
Yes, it is designed with integrated socket seals for a quick and watertight connection.
It is designed for standard 110mm drainage pipe systems; always verify that your pipe wall thickness meets standard residential drainage specifications.
Yes, this component is specifically designed for underground drainage applications, provided the trench is prepared according to standard bedding procedures.
Maintain access via inspection chambers; if a blockage occurs, use standard drainage rods ensuring they do not snag on the junction shoulders.
Check for debris inside the seal, ensure the pipe end is properly chamfered, and apply more lubricant.
Ensure the pipe is pushed in deep enough to clear the internal seal and verify that the pipe end is not cracked or deformed.
Lubrication is essential; if it is too tight, ensure you are using a non-petroleum-based lubricant compatible with rubber seals.
To install this junction, first ensure the pipe ends are chamfered at the edge to prevent tearing the internal seals. Apply a thin layer of pipe lubricant to both the spigot end of your 110mm pipe and the internal socket of the junction. Push the pipe firmly into the socket, then pull back approximately 10mm to allow for thermal expansion. Always keep these junctions accessible via an inspection chamber or rodding point in accordance with local building regulations to ensure future maintenance is possible. Regularly inspect the joints for signs of debris accumulation after heavy rain or system usage.
