GARDENA Auto Pump. Home and Garden 6000/5E LCD Premium - 1300W - 6000l/h - 5.5 bar



Currently unavailable



Currently unavailable
The GARDENA Auto Pump Home and Garden 6000/5E LCD Premium is designed for homeowners and gardeners needing a robust solution for water transfer. Its key benefit is efficient, high-volume pumping with real-time monitoring via an LCD display. A potential caveat is the requirement for product registration to activate the extended warranty. This versatile pump offers a powerful 1300W motor, a flow rate of 6000 liters per hour, and 5.5 bar pressure, making it suitable for submerged operation in various domestic and garden water management tasks.
| Model Part Number | 1760-20 |
|---|---|
| Brand | Gardena |
The product information does not specify a maximum submersible depth, but it is designed for operation when fully submerged. Always refer to the user manual for specific depth limitations and operating conditions.
The pump is suitable for clear or slightly dirty water with a maximum particle size of 3mm. It is not designed for heavily soiled water or water with larger solid particles.
Product registration is typically done through the manufacturer's website. Please refer to the warranty card included with your product or visit the GARDENA website for specific registration instructions.
The pump requires a standard electrical power outlet. Please ensure the power source matches the voltage and frequency requirements specified on the pump's rating plate and in the user manual.
The pump comes with a 5-year extended warranty upon product registration. Non-registered products may have a shorter standard warranty period.
While designed for robust performance, continuous operation without monitoring or adequate cooling could potentially lead to overheating. It is advisable to operate the pump as needed and allow for rest periods if necessary, following manufacturer guidelines.
Check if the power cord is securely plugged in and the power outlet is functional. Ensure the pump is not overheating.
Clean the intake filter and ensure there are no kinks or blockages in the hoses. Verify the water level is sufficient for submersion.
The thermal overload protection may have activated due to overheating. Allow the pump to cool down before restarting. Check for blockages that could cause strain.
Check for debris in the impeller or pump housing. Ensure the pump is stable and not vibrating excessively against surfaces.
Setup:
Compatibility:
The pump is designed for clear or slightly dirty water with a maximum particle size of 3mm. It is compatible with standard garden hoses and appropriate fittings for its outlet size.
Care: