Hygiene Cladding Joint Strip - 3mtr - White

Name: Hygiene Cladding Joint Strip - 3mtr - White
Brand: Storm
SKU: cgvj4qjzec
Availability: InStock

Hygiene Panel Joint Strip designed for use with 2-3mm sheets. Measuring 3 metres in length, this s...

Best current price£7.97from PVC Cladding UK

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

PVC Cladding UK£7.97Visit shop

Storm White Hygiene Cladding Joint Strip - For 2-3Mm Sheets X 3Mtr Length

Visit shop

All Offers

2 offers from £7.97 - £8.44

View price history by clicking the chart icon.

PVC Cladding UKStorm White Hygiene Cladding Joint Strip - For 2-3Mm Sheets X 3Mtr Length

Free delivery in 1–3 days

£7.97

Visit shop

Professional Building SuppliesStorm White Hygiene Cladding Joint Strip - For 2-3Mm Sheets X 3Mtr Length

Free delivery in 1–3 days

£8.44

Visit shop

Product Information

Full details

The Storm Hygiene Cladding Joint Strip is an essential component for contractors and DIY enthusiasts installing 2-3mm hygiene wall panels. It provides a seamless, professional finish while ensuring that joints remain clean and tidy. While the strip effectively masks gaps between sheets, users should ensure their wall surfaces are perfectly plumb to allow for the best fit during the installation process.

All features

Model Part Number	DIV-30-W
Brand	Storm

Extended Product Information

FAQs

Is this strip suitable for 5mm panels?

No, this strip is specifically designed for 2-3mm hygiene panels and will not fit thicker boards.

Can I use this in a shower area?

Yes, the material is moisture-resistant and suitable for wet environments when installed with appropriate sealant.

What is the difference between one-part and two-part strips?

A one-part strip is typically slid on during installation, whereas a two-part strip uses a base trim fixed to the wall, allowing the cover to snap on after panels are positioned.

How do I cut the strips to size?

The strips can be easily cut using a fine-tooth hacksaw or a miter saw for clean edges.

Is the material UV stable?

The strips are designed for indoor hygiene applications; avoid prolonged direct sunlight exposure to prevent potential yellowing.

Troubleshooting

Strip will not snap into place

Check that the back trim is not obstructed by excess adhesive or panel bowing; ensure the panel is pushed fully into the trim groove.

Visible gap between strip and panel

Verify that the panel thickness is within the 2-3mm range and check that the panel edge is cut straight and free from burrs.

Pros and Cons

Pros

Creates a professional and hygienic finish
Easy to cut to exact size requirements
Compatible with standard 2-3mm panel thicknesses
Durable material suitable for moist environments
Hides minor irregularities at panel edges

Cons

Requires precise measurement before cutting
May be difficult to remove once snapped into place
Limited color choice (white only)
Not suitable for panels thicker than 3mm

Setup, Compatibility & Care

To install, ensure your panels are cut to the correct dimensions and held securely in place. For the two-part strip, fix the back trim component to the substrate using recommended adhesives or mechanical fixings, ensuring it is perfectly vertical. Once the adjacent panels are positioned, press the front trim firmly until it snaps into the back channel. Maintenance is straightforward: simply wipe down the strips with a non-abrasive cloth and mild detergent. Avoid using harsh chemical solvents that could degrade the finish or cause discoloration over time.