Best current price£34.99from Robert Dyas
Shopping.co.uk recommended and popular offers
Robert Dyas£34.99Visit shop d-c-fix Ava Static Cling Window Film - 45cm Width - Clear
Visit shop
Frasers£35.00Visit shop D C Fix Ava Static Cling Window Film - Frost - 45CMX10M
Visit shop5 offers from £34.99 - £39.97
View price history by clicking the chart icon.
The D-C-Fix Ava Premium Static Cling Window Film is a versatile DIY solution for renters, homeowners, and landlords seeking to quickly add privacy or decorative elements to windows, doors, and shower screens without permanent alteration. Its key benefit lies in its easy, adhesive-free application and removal, offering 95% UV protection to prevent fading and reduce glare while still allowing light to pass through. A potential caveat is the need for precise application around seals to ensure longevity.
| Colour | White |
|---|---|
| Model Part Number | VMRCV |
| Brand | d-c-fix |
Clean the film by wiping it with a damp cloth and a mild household cleaner. Avoid scrubbing the surface, as this can damage the finish.
Yes, the D-C-Fix static cling film is fully removable and reusable. It leaves no residue and can be reapplied multiple times if stored carefully.
No, while it provides privacy and reduces glare, the film still allows light to shine through. It does not offer complete blackout.
The 95% UV protection helps prevent fading of furniture, carpets, and artwork caused by direct sunlight, extending the life and appearance of your belongings.
This film is designed for indoor glass surfaces like home windows and shower screens. Its suitability for car windows may vary depending on local regulations and the curvature of the glass.
When applied correctly and cared for properly, the film is durable and can last for an extended period. However, factors like extreme temperature fluctuations or harsh cleaning can affect its lifespan.
The film is best applied to flat, smooth glass surfaces. While it has some flexibility, significant curves may lead to creasing or lifting.
Ensure the glass is perfectly clean and wet. The static side of the film must be correctly identified (the side that was against the backing paper). Re-spray the glass generously with water.
Use a squeegee or credit card to firmly push trapped air and water towards the edges of the film. For stubborn bubbles, you may need to carefully peel back that section, re-wet the glass, and reapply.
Ensure the film was not applied too close to the rubber window seal or gasket. Trim the film slightly to create a 2mm gap from the seal. Re-wet the edges and press firmly.
Use a piece of clear tape on a corner of the backing paper to help lift it. Ensure you are pulling the backing paper away, not the film itself.
Setup:
Compatibility:
Care:
