Harris Seriously Good Walls and Ceilings Angled Brush - 1 inch
This Harris Seriously Good Walls & Ceiling Angled Brush has been specifically designed and enginee...This Harris Seriously Good Walls & Ceiling Angled Brush has been specifically designed and engineered for controlled paint application along edges and into corners. This brush will give you seriously good results when painting walls and ceilings with emulsion paint. For best results, rinse brush head before use to remove any dust.
Harris Seriously Good Walls & Ceilings 1in Angled Paint Brush has been specifically designed and engineered to give you a great finish when painting Interior walls and ceilings with emulsion paints.The Brush head uses Guaranteed No Bristle Loss technology patented by Harris, so you will never need to spend time pulling bristles out of completed paint work. The 1 inch angled brush head gives you more control when painting and is ideal for cutting in.This brush is excellent for painting into corners, along the top of skirting boards and around other details areas on walls and ceilings.
Specifically designed and engineered to give you seriously good results when painting walls and ceilings. Ideal for use with emulsion paint, these brushes are best used for cutting in from tight areas such as corners and along edges where masking tape cannot be used. Features and Benefits The angled head gives you more control when cutting in Guaranteed no bristle loss* Can be used with all emulsion paints for versatility Typical Applications Trade DIY Notes *Bristle loss may occur if left to soak or in a damp area For best results rinse brush head before use to clear any dust or debris
Harris Seriously Good Wall & Ceiling Paint Brush 25Mm Angled [102011002] 5056287400311Free delivery in 1–3 days£8.99Visit shop →
Product Information
Full details
This guide is for anyone looking to achieve professional-looking results when painting walls and ceilings with emulsion paints, especially in hard-to-reach areas. The Harris Seriously Good Walls and Ceilings Angled Brush provides controlled application and minimizes bristle loss, ensuring a smooth finish. However, it's important to note that proper cleaning and care are essential to maintain its performance over time.
All features
Model Part Number
102011002
Brand
Harris
Extended Product Information
FAQs
What type of paint is this brush best for?
This brush is specifically designed for use with emulsion paints.
How do I clean the brush?
Clean the brush with water after using water-based paints. For oil-based paints, use the appropriate solvent, following the paint manufacturer's instructions.
How should I store the brush?
Store the brush in a clean, dry place, ideally with the bristles protected to maintain their shape.
Can I use this brush for other types of paint?
While designed for emulsion paints, it might work with other paints, but results may vary. It is always recommended to use the right brush for the right paint.
What is the benefit of the angled brush head?
The angled head provides greater control and precision, especially when painting corners, edges, and trim.
Does the brush lose bristles?
No, the brush uses a Guaranteed No Bristle Loss technology. However, bristle loss may occur if left to soak or in a damp area.
What size is the brush?
The brush is 1 inch.
Troubleshooting
Bristles falling out during use.
Ensure the brush is not left to soak in water. Clean the brush thoroughly after each use and store it properly.
Difficulty achieving a smooth finish.
Ensure the brush is loaded with the correct amount of paint. Apply paint in even strokes and avoid overbrushing.
Paint is not applying evenly
Rinse the brush head before use. Make sure the brush is loaded with the correct amount of paint.
Pros and Cons
Pros
Precise application in corners and edges.
Guaranteed no bristle loss for a clean finish.
Specifically designed for emulsion paints.
Easy to control, ideal for cutting in.
Suitable for both professional and DIY use.
Durable and long-lasting with proper care.
Cons
Requires proper cleaning to prevent bristle damage.
May not be suitable for all paint types.
Bristle loss may occur if left to soak or in a damp area.
May require more effort to clean than some other brush types.
Limited to a 1-inch brush head size.
Setup, Compatibility & Care
Preparation: Before use, rinse the brush head to remove any manufacturing dust or debris.
Paint Compatibility: This brush is specifically designed for use with emulsion paints.
Application: Load the brush with paint, tapping off any excess. Apply paint using smooth, even strokes.
Cleaning: After use, thoroughly clean the brush with water (for water-based paints) or the appropriate solvent (for oil-based paints). Make sure to follow the paint manufacturer's instructions. Rinse brush head before use to clear any dust or debris.
Storage: Store the brush in a clean, dry place, ideally with the bristles protected to maintain its shape. Avoid leaving the brush soaking in water or paint for extended periods.
Drying: Allow the brush to dry completely before storing to prevent damage to the bristles.