Electric Outboard Motor Engine - FOX 65LB 12V 3 Blade Prop

This 65lb thrust motor is best suited for small to medium-sized boats such as dinghies, jon boats, inflatable boats, and small fishing boats (up to approximately 18-20 feet) in freshwater.

No, this motor is designed and recommended for freshwater use only. Saltwater can cause significant corrosion and damage to the motor's components.

You will need a 12V deep-cycle marine battery. The battery's amp-hour (Ah) rating will determine the run time; higher Ah ratings provide longer operation.

Thrust is measured in pounds (lb), indicating the force the motor can generate to propel the boat through the water.

The shaft height for the 65lb model is 81cm.

Typically, electric outboard motors are sold separately from batteries and chargers. You will need to procure these items to operate the motor.

After use, ensure the motor is turned off. Carefully remove any weeds or debris by hand. If necessary, you can use a soft brush and clean water. Avoid using harsh chemicals.

Ensure the 12V battery is fully charged and correctly connected with proper polarity. Check that the safety clip (if applicable) is engaged. Verify that the motor is not overheated.

Check the propeller for any weeds, fishing line, or debris. Ensure the battery charge is sufficient. Inspect for any potential blockages in the water intake (if applicable).

Ensure the motor is adequately submerged. Check for any obstructions around the motor housing that might impede cooling. Allow the motor to cool down before re-operation.

Release the locking mechanism fully. If stiff, gently try to maneuver the shaft while operating the release lever. Clean any debris from the pivot points.