Best current price£6.60from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£6.60Visit shop Roughneck Brick Jointer 19 & 22Mm (3/4 & 7/8In) 51-033
Visit shop
B&Q£11.35Visit shop B&Q - 51-031 Brick Jointer 12 & 16mm (1/2 & 5/8In) Rou51031
Visit shop24 offers from £6.60 - £11.92
View price history by clicking the chart icon.
The Roughneck Brick Jointer (12 & 16mm) is designed for professional bricklayers and serious DIYers seeking to create clean, durable, and weathertight mortar joints. Its primary benefit is enhancing the aesthetic and structural integrity of brickwork through consistent joint finishing. A potential caveat is that it requires a degree of skill to achieve optimal results, especially on varied brick types. Key features include heavy-gauge high-carbon steel construction, a hardened and tempered finish for wear resistance, and a polished edge for smooth guidance and clean joint formation.
| Model Part Number | 51-031 |
|---|---|
| Brand | Roughneck |
This specific model features two joint widths: 12mm and 16mm.
It is constructed from heavy-gauge high-carbon steel.
This treatment makes the tool highly resistant to wear and helps it maintain accuracy over extended use.
It is suitable for most standard brick types. Exercise caution on very soft or brittle bricks to avoid damaging the brick or the mortar joint.
Wipe off excess mortar immediately after use with a damp cloth. For tougher residue, use a soft brush. Store in a dry location.
The polished edge allows the tool to glide smoothly over the mortar, helping to create clean, uniform, and weathertight joints with less effort.
Yes, by creating tidy and consistent mortar joints, it helps to form a weathertight seal that can prevent water ingress into the brickwork.
Ensure consistent pressure when gliding the jointer. Check that the mortar has reached the correct 'thumbprint' hardness before tooling. Clean the jointer's polished edge for a smooth pass.
The mortar may be too wet or too dry. Adjust the mix consistency. Ensure the jointer's polished edge is clean and free from dried mortar residue.
Clean the tool thoroughly after use. If mortar persistently sticks, a very light application of a non-stick spray designed for masonry tools might be considered, though typically just cleaning is sufficient.
Setup: The Roughneck Brick Jointer is ready for immediate use. Ensure mortar is at the correct consistency for optimal results. Select the appropriate end of the tool (12mm or 16mm) based on the desired joint width.
Compatibility: This tool is designed for use with standard cement-based mortar mixes. It is compatible with most common brick types, but care should be taken on very soft or friable materials to avoid damage.
Care: After each use, clean the jointer thoroughly by removing any excess mortar. A damp cloth is usually sufficient. For stubborn residue, a soft brush can be used. Store the tool in a dry place to prevent rust. Periodically inspect the polished edge for any damage that might affect performance.
