Graffiti Remover - Aerosol Solutions

This product is effective against spray paints, crayons, pens, and felt-tip marker marks.

It is suitable for metal surfaces, brickwork, glass, and tiles. Always test on an inconspicuous area first.

The gel formulation sprays on but clings to surfaces, including vertical ones, allowing it to stay in contact with the graffiti for longer, enhancing its effectiveness and preventing drips.

Yes, it is recommended to wear gloves and eye protection, and to use the product in a well-ventilated area to avoid inhaling fumes.

Dwell time can vary depending on the type and age of the graffiti, but typically 5-10 minutes is recommended. Observe the graffiti to see it softening.

It is generally not recommended for painted walls unless the paint is known to be extremely durable and resistant to solvents. Always perform a patch test in a hidden area first, as it may strip paint.

Store the aerosol can in a cool, dry place, away from direct sunlight and heat sources. Ensure it is kept out of reach of children.

Apply a second layer of the graffiti remover, ensuring adequate dwell time. For very old or thick graffiti, a more aggressive scrubbing action or repeated applications may be necessary.

Ensure the can is held at an appropriate distance (usually 6-10 inches) and the spray is not overly concentrated in one spot. The thixotropic nature means it should cling; if not, the product may be too old or exposed to extreme temperatures.

This indicates the surface is sensitive to the product. Immediately rinse the area thoroughly with water and consult the product's safety data sheet for specific surface limitations. Always perform a patch test in a hidden area before full application.

Ensure the can is adequately shaken. Check if the nozzle is clogged; if so, carefully clean it with a pin or needle. If the can is empty, it will not spray.