Facom Heavy Duty End Nipper - 250mm
Best current price£24.95from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£24.95Visit shop Facom 495A.25EL Heavy Duty End Nipper - Length: 250mm
Visit shopeBay£24.95Visit shop All Offers
4 offers from £24.95 - £25.95
View price history by clicking the chart icon.
eBayFacom 495A.25EL Heavy Duty End Nipper - Length: 250mm
Free delivery in 1–3 days
£24.95
Visit shop
Facom Heavy Duty End Cutting Pliers£5.95 delivery£25.95Visit shop →
Facom Heavy Duty End Cutting Pliers 250mm£5.95 delivery£25.95Visit shop →
Product Information
Full details
The Facom 495A.25EL Heavy Duty End Nipper is designed for professional mechanics, construction workers, and tradespeople who require a reliable tool for heavy-duty wire cutting and extraction tasks. Its key benefit lies in the offset pivot design, which provides exceptional leverage, reducing the physical effort required to cut tough materials; however, users should be aware that the 250mm size is significant and may feel bulky in tighter, restricted spaces compared to smaller precision cutters.
All features
| Model Part Number | 495A.25EL |
|---|---|
| Brand | Facom |
Extended Product Information
FAQs
What is the primary material composition of the cutting edge?
The cutting edges are made from high-frequency hardened steel, rated at 60/62 HRC for superior durability.
Can I use these nippers for cutting electrical wires?
While capable of cutting wire, these are not insulated tools. Do not use them on live electrical circuits.
What is the total length of the 495A.25EL?
The tool has a total length of 250mm.
Is the finish on this tool resistant to corrosion?
Yes, it features a durable burnished finish that offers high resistance to corrosion in standard workshop environments.
Does the head width affect its performance in tight spaces?
The 35mm head width is optimized for power and grip, but it may limit accessibility in very narrow or obstructed work zones.
How often should I sharpen the blades?
Thanks to the high-frequency hardening process, the edges are designed for a long working life and should not require frequent sharpening if used on appropriate materials.
Troubleshooting
Difficulty achieving a clean cut through thick wire
Ensure the wire is positioned as deep into the jaw as possible, closest to the pivot point, to utilize maximum leverage.
Nippers feel stiff during operation
Clear any debris or grit from the pivot area and apply a small amount of machine oil to the hinge.
Surface rust appearing on the body
Clean the surface with a fine wire wool or non-abrasive pad, then apply a thin coating of anti-corrosion oil.
Pros and Cons
Pros
- High cutting power due to offset pivot geometry
- Long-lasting edge retention with 60/62 HRC hardening
- Easy to rotate in the hand during operation
- Rugged build quality suitable for heavy-duty professional use
Cons
- Larger 250mm frame may be cumbersome in cramped areas
- Requires significant grip strength for full utility
- Limited to end-cutting applications rather than lateral snipping
Setup, Compatibility & Care
This tool requires no formal setup and is ready for use immediately upon arrival. To maintain the integrity of the 60/62 HRC cutting edges, avoid using the nippers on hardened steel materials or masonry, as this can cause chipping. After working in humid or outdoor conditions, wipe the tool down with a light machine oil to maintain the burnished finish and prevent surface rust. Periodically inspect the pivot point for debris buildup and apply a drop of light lubricant if the opening motion becomes stiff.