Autotek Aerosol Spray Paint - Signal Red - 300ml

This paint is suitable for metal, glass fibre, and rigid plastic surfaces. For best results and durability, always prepare the surface by cleaning it thoroughly and applying a primer.

The paint should be touch dry in 10-20 minutes. It requires a full 24 hours to cure completely.

No, it is recommended to use the paint outdoors or in a well-ventilated area at temperatures between 15°C and 25°C for optimal results.

After each application, invert the can and spray for 2-5 seconds to clear any paint from the nozzle. This prevents blockages.

While not strictly mandatory for all applications, applying a minimum of two coats of Autotek Red Primer is highly recommended for optimum adhesion and the best possible finish.

This specific Signal Red paint is an exact match for Kia Rio and Sportage models manufactured between 2010 and 2018.

Yes, this paint is compatible with nearly all automotive paint finishes, including cellulose finishes, provided the surface is properly prepared.

Ensure the can has been shaken thoroughly for at least 2 minutes. Try adjusting the spray distance (15-25cm) and apply in thinner, more consistent coats.

Turn the can upside down and spray for 2-5 seconds after each use to clear the nozzle. If still blocked, try soaking the nozzle in a suitable solvent (follow solvent manufacturer instructions).

Ensure the surface was properly cleaned and free from contaminants. Apply Autotek Red Primer before the topcoat for optimal adhesion. Check if the temperature is within the recommended range (15°C-25°C).

Verify that you are using the correct paint code (BEG for Kia Signal Red). Ensure the original paint on the vehicle has not faded significantly, which may require professional colour matching.