Best current price£12.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.99Visit shop B&Q - Heavy Duty M8X50mm Masonry Wall Screws With Plugs And Washers For Tv Bracket Satellite Dish And Shelf Mount Pack Of 20
Visit shop1 offer from £12.99
View price history by clicking the chart icon.
This heavy-duty Inbrackets M8 x 50mm masonry wall fixing kit is designed for professionals and DIY enthusiasts needing secure, long-lasting installations in brick, block, and concrete. Its key benefit is providing a strong, stable solution for mounting heavy items like TV brackets, satellite dishes, or shelving. A potential caveat is the need for appropriate tools for installation. The kit includes durable zinc-plated M8 coach bolts, anti-rotation nylon wall plugs, and steel washers.
| Model Part Number | M8 x 50mm |
|---|---|
| Brand | Inbrackets |
You will typically need a 10mm drill bit to match the diameter of the included rimmed nylon wall plugs.
Yes, the zinc-plated steel bolts and nylon plugs are designed to be resistant to rust and corrosion, making them suitable for indoor and outdoor use, including wet or damp areas.
The maximum load capacity depends on the specific masonry material, its condition, and the installation quality. Always refer to load ratings for similar fixings and consider a safety margin. For very heavy loads, consult a structural engineer.
These fixings are designed for solid masonry materials such as brick, concrete, and blockwork. They are not suitable for hollow walls or plasterboard without appropriate additional anchoring techniques.
You will need a drill, a 10mm drill bit, and a wrench or socket set (13mm for the bolt head) for installation.
Yes, the rimmed design of the nylon wall plugs prevents them from being pushed too far into the drilled hole, ensuring they seat correctly.
Ensure the drill hole is clean and free of debris. The anti-rotation fins should grip the sides of the hole; if they don't, the hole might be slightly too large or the masonry too soft. Try a different location or use a slightly larger plug if compatible.
Check that the wall plug is fully inserted and seated correctly. Ensure the bolt is engaging properly with the threads of the wall plug. The hole may need to be redrilled to a slightly greater depth if the bolt is bottoming out.
Remove the bolt and plug. Inspect the wall material for damage or excessive porosity. Clean the hole thoroughly and reinsert the plug, ensuring it's fully seated. If the issue persists, consider using a different type of anchor suitable for the specific wall material or consult a professional.
Setup:
Compatibility:
Care:
