Shopping.co.uk

Mucky Nutz Skinz Bike Fork & Crank Protection Tape - Clear White Gloss

Mucky Nutz Skinz Bike Fork & Crank Protection Tape - Clear White Gloss

The Clear Fork and Crank Skinz kit delivers essential protection for your MTB or e-MTBs fork legs ...

Best current price£23.01from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

4 offers from £23.01 - £25.07

View price history by clicking the chart icon.

eBayMucky Nutz Skinz Bike Fork & Crank Protection Tape Clear White Gloss
Free delivery in 1–3 days
£23.01
Visit shop
TredzMucky Nutz Clear | White Gloss Fork And Crank Skinz Frame Protection
Free delivery in 1–3 days
£25.00
Visit shop

Product Information

Full details

The Mucky Nutz Skinz kit is an essential accessory for mountain bikers and e-bike owners who want to maintain their bike's resale value by preventing cosmetic damage. It offers superior impact protection for vulnerable fork legs and crank arms while remaining virtually invisible due to its crystal-clear finish. While the material is highly durable and flexible for complex contours, users should note that careful alignment during installation is required to ensure a bubble-free finish.

All features

Model Part NumberMN0266
BrandMucky Nutz

Extended Product Information

FAQs

Will this protect against heavy impact?

It is designed to absorb stone chips and scuffs. While it offers excellent surface protection, it cannot prevent damage from extreme high-velocity direct impacts.

Can I use this on carbon fiber cranks?

Yes, the adhesive is safe for use on both alloy and carbon fiber components.

Does the tape turn yellow over time?

The material is designed to be crystal clear and resistant to UV damage, keeping it clear for a significant duration under normal use.

How do I remove the tape without leaving residue?

Gently heat the film with a hair dryer to soften the adhesive, then peel slowly. Any remaining adhesive can be removed with a mild citrus-based cleaner.

Are these stickers universal?

They are designed to fit the majority of MTB and e-MTB fork lowers and standard crank arm profiles.

Troubleshooting

Air bubbles trapped under the film

Use a pin to prick the bubble and carefully press the air out, or gently lift the edge and re-apply.

Film edges lifting

Ensure the surface was fully degreased; use a heat gun or hair dryer on low setting to warm the adhesive for better bonding.

Pros and Cons

Pros

  • Virtually invisible installation preserves aesthetics
  • Motocross-grade durability protects against deep scuffs
  • Easy to apply and remove without damaging factory paint
  • Compatible with a wide range of standard MTB and e-MTB setups

Cons

  • Requires a clean, dry surface for optimal adhesion
  • Installation requires patience to avoid air bubbles on curved surfaces
  • Specific to fork and crank coverage; does not cover frame tubes

Setup, Compatibility & Care

  1. Clean: Thoroughly degrease the fork legs and crank arms using isopropyl alcohol to ensure no oils or dirt remain.
  2. Dry: Wipe the area completely dry with a lint-free cloth.
  3. Apply: Peel the backing and align the tape. Use a squeegee or soft cloth to smooth the tape from the center outward to push out air bubbles.
  4. Cure: Allow the adhesive to set for at least 24 hours before riding, especially in wet or muddy conditions.
  5. Maintenance: Clean the bike as usual with mild detergent. Avoid high-pressure washers directed specifically at the edges of the film, as this may cause the adhesive to lift over time.

Price History

DatePrice
Visit shop