Tallas D-EBOOST 1100 Booster Pump - 1100W
Best current price£179.00from Waterpump UK
Best offers
Shopping.co.uk recommended and popular offers
Waterpump UK£179.00Visit shop Tallas Blue / Black D-Eboost 1100 Booster Pump
Visit shopWaterpump UK£179.00Visit shop One Offer
1 offer from £179.00
View price history by clicking the chart icon.
Waterpump UKTallas Blue / Black D-Eboost 1100 Booster Pump
Free delivery in 1–3 days
£179.00
Visit shop
Product Information
Full details
The Tallas D-EBOOST 1100 Booster Pump is designed for homeowners and domestic users who need a consistent and reliable water pressure supply. Its key benefit is providing water on demand, automatically switching on when a tap is opened or when a specific pre-set pressure isn't met. A potential caveat is that users may need to adjust the factory default settings for optimal performance in specific scenarios.
All features
| Model Part Number | 309618 |
|---|---|
| Brand | Tallas |
Extended Product Information
FAQs
How do I adjust the pressure settings?
The pressure parameters can be adjusted via the electronic interface located on the side of the pump. Consult the user manual for step-by-step instructions on navigating the interface and setting your desired switch-on and switch-off pressures.
Is this pump suitable for well water?
Yes, the pump is designed to draw water from various sources, including wells, provided the water is free from excessive sediment. The pre-filter helps protect the pump, but regular cleaning is essential.
What is the warranty period for the Tallas D-EBOOST 1100?
Please refer to the official Tallas pumps website (www.tallaspumps.com) or the product documentation for the most current warranty information.
Can this pump be used for continuous operation?
The pump is designed for automatic start/stop functionality. It includes a built-in clock for automatic stop after 30 minutes of continuous operation to prevent overheating and ensure efficiency, though it is designed for reliable domestic use.
How do I clean the pre-filter?
The pre-filter can be easily opened and cleaned with the supplied multitool. Remove the filter, rinse it thoroughly under running water to remove any debris, and then reassemble it.
What does 'self-priming' mean?
Self-priming means the pump can automatically draw water up from a source below its level (up to 8 meters) without needing manual priming or filling with water before initial startup.
Troubleshooting
Pump does not switch on automatically
Check if the pump is properly connected to the power supply. Verify that the tap is fully opened and that the water source has a sufficient flow. Ensure the pressure settings on the electronic interface are configured correctly.
Low water pressure after installation
Clean the integrated pre-filter. Check for any kinks or blockages in the inlet or outlet hoses. Adjust the switch-on pressure setting on the electronic interface to a lower value if necessary.
Pump switches off unexpectedly
The dry-running protection may have activated. Check if the water source is depleted or if there is an air leak in the suction line. Ensure the pump is not running dry.
Unusual noise during operation
Ensure the pump is securely mounted and not vibrating against any surfaces. Check the pre-filter for debris. If the noise persists, it might indicate an issue with the motor; contact customer support.
Pros and Cons
Pros
- Provides on-demand water pressure automatically.
- Integrated safety features like dry-running protection.
- Adjustable settings for customized water pressure.
- Compact, lightweight, and easy to install ('Plug & Play').
- Quiet operation due to the water-cooled motor.
- ACS certified for use with drinking water.
Cons
- Requires initial setup and potential pressure adjustment for optimal use.
- The noise level, while water-cooled, might still be noticeable in very quiet environments.
- Pre-filter requires regular cleaning to maintain performance.
- Maximum operating limits for pressure and flow need to be observed.
Setup, Compatibility & Care
Setup: The Tallas D-EBOOST 1100 is designed for easy installation with "Plug & Play" functionality and swivel connections. Ensure the pump is connected to a suitable water source and outlet. Follow the included manual for detailed wiring and plumbing instructions. The electronic interface on the side allows for easy configuration of pressure parameters.
Compatibility: This pump is suitable for domestic water pressurization and can be used with drinking water (ACS certified). Ensure your existing plumbing can handle the increased pressure. It is designed to work with water mains or other water sources.
Care: Regularly clean the integrated pre-filter to prevent blockages and maintain pump efficiency. The pump can be easily emptied of residual water to protect it from frost and limescale buildup, especially during winter months. Refer to the manual for specific cleaning procedures using the supplied multitool.