Xcel Home - M10 (10mm) x 1/2" BSP x 900mm Long Flexible Tap Connector Pipes (9mm Inner Bore)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for plumbers and DIY enthusiasts needing reliable tap connectors for kitchen sinks and bathrooms. The key benefit is the WRAS approval and robust construction, ensuring safe, long-lasting performance under high pressure. A potential caveat is the specific fitting size, requiring verification against your plumbing. These 900mm flexible tap connector pipes, featuring a 9mm inner bore and M10 (10mm) to 1/2" BSP connections, are designed for ease of installation and durability in modern plumbing systems.
All features
| Model Part Number | M10 (10mm) x 1/2" BSP x 900mm Long Flexible Tap Connector Pipes (9mm Inner Bore) |
|---|---|
| Brand | Xcel Home |
Extended Product Information
FAQs
Are these pipes suitable for instant hot water systems?
Yes, these pipes are rated for temperatures up to 85°C and are designed for high-pressure systems, making them suitable for many instant hot water applications, provided the temperature and pressure do not exceed the specified limits.
Can I use these pipes with a gravity-fed system?
While designed for high-pressure systems, they can be used with gravity-fed systems. However, their primary benefit in terms of handling pressure will be less critical.
What is WRAS approval?
WRAS (Water Regulations Advisory Scheme) approval means the product has been tested and meets the requirements of the Water Supply (Water Fittings) Regulations 1999 in England and Wales, ensuring it is safe for use with drinking water.
How do I know if the M10 (10mm) fitting will match my tap?
Most standard monobloc mixer taps use threaded tails that are compatible with an M10 (10mm) connection. It's advisable to measure or check the tap manufacturer's specifications if unsure.
What is the maximum pressure these connectors can handle?
The maximum working pressure for these flexible tap connector pipes is 15 bar.
Can the stainless steel braiding corrode?
The 304 stainless steel braiding is highly resistant to rust and corrosion, ensuring long-term durability under normal plumbing conditions.
Troubleshooting
Leak at the 1/2" BSP connection
Ensure the connection is snug. Check if a fiber or rubber washer is present and correctly seated within the fitting. If connecting to a compression fitting, ensure the olive is correctly compressed onto the pipe.
Leak at the M10 connection
Ensure the tap tail is clean and free of debris. Hand-tighten the connector onto the tap tail first, then use a spanner for a final secure fit. Check if any rubber seal or washer on the tap tail is damaged or missing.
Reduced water flow
Check for kinks in the flexible hose. Ensure the isolation valves are fully open. Verify that the inner bore (9mm) is not obstructed by debris.
Pipe feels stiff or difficult to bend
The braided hose has flexibility, but avoid extreme bending that could compromise the internal structure or braiding. Gentle, sweeping bends are recommended.
Pros and Cons
Pros
- WRAS approval guarantees safety for drinking water.
- Durable stainless steel braiding resists corrosion and damage.
- Designed for high-pressure systems, offering reliability.
- Lead-free materials ensure a healthier water supply.
- Flexible design simplifies installation in tight spaces.
Cons
- Specific M10 (10mm) connection might require adapters for non-standard fixtures.
- 900mm length may be excessive for very compact installations.
- Requires a 15mm male fitting for the 1/2" BSP connection.
Setup, Compatibility & Care
Setup:
- Ensure the water supply is turned OFF at the mains.
- Identify the hot and cold water outlets on your tap and the corresponding water supply points.
- Connect the 1/2" BSP fitting of the pipe to the appropriate 15mm male plumbing fitting (e.g., a stopcock or isolation valve) using a spanner for a secure, snug fit. Do not overtighten.
- Connect the M10 (10mm) end to the tap's threaded supply tails. Hand-tighten first, then use a spanner for a final quarter turn if needed. Ensure a good seal.
- Turn the water supply back on slowly and check thoroughly for any leaks at both connection points.
Compatibility:
- Designed for standard UK 15mm male plumbing fittings.
- Suitable for monobloc mixer taps with threaded tails compatible with M10 (10mm) fittings.
- Appropriate for both hot and cold water lines.
- Maximum working pressure: 15 bar.
- Maximum working temperature: 85°C.
Care:
- Periodically check connections for signs of wear or leaks.
- Clean the braided exterior with a damp cloth if necessary. Avoid abrasive cleaners.
- Ensure the pipes are not subjected to excessive stress or sharp bends that could damage the braiding.