DEWALT DCLE14361GB-XJ - USB-C Rechargeable 3x360 Green Beam Laser Level

The laser lines have a visibility range of up to 45 meters. This can be extended to 100 meters when used with a compatible laser detector.

A fully charged battery provides up to 8 hours of runtime, suitable for a full workday.

While the green beam offers good visibility, it is primarily designed for interior applications. For outdoor use, a detector is highly recommended, and it's best suited for tasks in shaded areas or during low-light conditions.

The IP65 rating signifies that the laser level is protected against dust ingress and is resistant to water jets, making it suitable for demanding construction environments.

The laser level is charged via a USB-C port. You can use a standard USB-C cable connected to a wall adapter, power bank, or computer.

The fine adjustment knob allows for precise rotational positioning of the laser line, enabling highly accurate alignment with specific points or existing lines on the job site.

The DEWALT DCLE14361GB-XJ is supplied with a USB-C Cable, a Rule, and a Carry Case. A tripod is not included but can be mounted using its 1/4" or 5/8" thread.

Ensure the battery is fully charged. Adjust the beam brightness setting. Check for any dirt or smudges on the laser emitter windows and clean them gently.

Ensure the laser is placed on a reasonably stable surface. Make sure the pendulum lock is disengaged (unlocked position). Check if the tilt angle is within the ±4° self-levelling range.

Verify the surface is stable and the unit is correctly positioned. Ensure the fine adjustment knob is not accidentally engaged. Recalibrate if necessary or check for damage.

Connect the unit to a USB-C power source and verify it is charging. Ensure the battery is properly seated. Try a different USB-C cable and power adapter.