Best current price£7.99from eBay
Shopping.co.uk recommended and popular offers
eBay£7.99Visit shop x1 Rust-Oleum Colour Wash Translucent Coloured Wood Stain 750ml Coral Frost
Visit shop3 offers from £7.99 - £9.60
View price history by clicking the chart icon.
This Rust-Oleum Colour Wash Translucent Coloured Wood Stain in Coral Frost is for DIY enthusiasts and crafters looking to add a subtle, pearlescent tint to bare wood, enhancing its natural grain. Its key benefit is providing a beautiful, translucent colour wash in a single coat, eliminating the need for a wax or lacquer finish. A potential caveat is that some tins may exhibit surface rust due to warehouse conditions, though the paint itself remains unaffected.
| Colour | Orange |
|---|---|
| Model Part Number | RO0180003G1 |
| Brand | Rust-Oleum |
No, this Colour Wash is designed for bare wood only. If your wood is painted or varnished, you must remove the existing finish completely before applying the stain.
No, the Rust-Oleum Colour Wash Translucent Coloured Wood Stain is formulated to be used without a wax or lacquer finish. The paint work is finished once the stain is applied and dried.
No, this product is strictly for interior use only and is not designed to withstand outdoor weather conditions.
Clean gently with a slightly damp cloth. Avoid using harsh detergents or abrasive cleaners.
Surface rust can occur due to humidity and condensation in the warehouse. It is a cosmetic issue and does not impact the quality or usability of the paint inside the tin.
Coverage can vary depending on the porosity of the wood and application method, but it typically offers exceptional coverage in one coat for typical projects like furniture, cabinets, doors, frames, and general bric-a-brac.
While not explicitly stated, mixing colors is generally possible with wood stains, but it's recommended to test on a scrap piece of wood first to ensure the desired result.
This is a cosmetic issue due to warehouse condensation and does not affect the paint quality. The paint inside is unaffected and suitable for use.
Ensure the stain is stirred thoroughly. Apply in thin, even coats and wipe off excess immediately with a clean cloth to blend. Work in small sections if necessary.
You may have applied the coat too thickly or not wiped off excess stain promptly. Try to lightly sand the area and reapply a thinner coat, wiping off excess sooner.
The coat may be too heavy, or excess stain was not removed. Reduce the amount of product applied and ensure excess is wiped away quickly after application.
Setup: Ensure the surface to be painted is bare, clean, dry, and free from dust, grease, and wax. If the wood has a previous finish, it must be removed completely. Stir the Colour Wash thoroughly before and occasionally during use. Apply with a brush or cloth in a thin, even coat, following the direction of the wood grain. Wipe off excess immediately with a clean cloth to achieve the desired translucency.
Compatibility: This product is designed for use on bare, unpainted wood only. It is intended for interior use and is not suitable for exterior applications or surfaces exposed to moisture or heavy wear.
Care: For maintenance, clean the finished surface gently with a slightly damp cloth. Avoid abrasive cleaners or excessive moisture, as this is a translucent stain and not a heavy-duty protective coating.
