Best current price£28.99from eBay
Shopping.co.uk recommended and popular offers
eBay£28.99Visit shop 17pc Micro Air Die Grinder Kit Mini Pencil Polishing Rotary Cutting Tool Set
Visit shop2 offers from £28.99
View price history by clicking the chart icon.
The Neilsen CT3073 Air Powered Micro Grinder Kit is designed for professionals and hobbyists requiring precision in detailed grinding, polishing, and deburring tasks. Its key benefit lies in the built-in speed regulator, allowing for fine control over the grinding process. A potential caveat is the need for a compatible air compressor to operate.
| Model Part Number | CT3073 |
|---|---|
| Brand | Neilsen |
You will need an air compressor that can maintain a working pressure between 85-115 psi (5.8-8.0 bar) and provide an average air consumption of at least 2 cfm.
The grinder features a built-in speed regulator. Adjustments are typically made via a control on the tool body, allowing you to increase or decrease the rotational speed as needed.
The 10 grinder heads are designed for a variety of tasks, including grinding, polishing, deburring, rust removal, and shaping on different materials. Specific applications may vary based on head shape and grit.
This is an air-powered *micro* grinder, best suited for precise, detailed work. It is not designed for heavy-duty material removal.
The kit includes a 1.5-meter (approximately 4.9 feet) air hose with a protective sleeve.
After use, clean the tool with a dry cloth and store it in a dry place. Periodically check the air hose for damage and ensure the air inlet is clear. Refer to the user manual for any specific lubrication requirements.
Check air pressure from the compressor to ensure it is within the 85-115 psi range. Verify the air hose connection is secure and there are no leaks. Ensure the average air consumption (2 cfm) requirement is met by your compressor.
Ensure the regulator mechanism is clean and free of debris. If the issue persists, the internal regulator may require professional servicing.
Ensure the grinder head is securely attached and balanced. Check if the air supply is consistent; fluctuating pressure can cause vibration. Inspect the tool for any internal damage.
Inspect the air inlet connection for tightness. Check seals and O-rings for wear or damage and replace if necessary. If leaks persist from the tool housing, professional inspection is recommended.
Setup: Ensure your air compressor is set to the recommended working pressure of 85-115 psi (5.8-8.0 bar). Connect the air hose securely to the micro grinder and your air source. Before initial use, briefly run the tool to clear any debris from the air lines.
Compatibility: This tool requires an air compressor with a minimum output capable of providing approximately 2 cfm (cubic feet per minute) of average air consumption. Ensure your air coupler is compatible with the grinder's air inlet.
Care: After each use, disconnect the air supply and clean the exterior of the grinder with a dry or slightly damp cloth. Store the tool and its accessories in a clean, dry environment. Periodically inspect the air hose for any signs of wear or damage. Lubrication of the air inlet may be required based on manufacturer recommendations for air tools.
