Cuprinol Anti-Slip Decking Stain - Hampshire Oak
Best current price£46.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£46.00Visit shop B&Q - Anti-Slip Hampshire Oak Decking Wood Stain5L
Visit shopB&Q£46.00Visit shop All Offers
3 offers from £46.00 - £58.55
View price history by clicking the chart icon.
OnBuy.comCuprinol (Hampshire Oak) Anti-Slip Decking Stain 5L
Free delivery in 1–3 days
£58.55
Visit shop
(Hampshire Oak) Cuprinol Anti-Slip Decking Stain 5L 5010212651445Free delivery in 1–3 days£58.55Visit shop →
Product Information
Full details
This guide is for homeowners looking to enhance the safety and appearance of their wooden decking. The Cuprinol Anti-Slip Decking Stain in Hampshire Oak offers a beautiful, durable finish with the added benefit of enhanced slip resistance and protection against algae. A key consideration is its coverage rate and the need for multiple coats for optimal results.
All features
| Colour | Brown |
|---|---|
| Brand | Cuprinol |
Extended Product Information
FAQs
How many coats of Cuprinol Anti-Slip Decking Stain are recommended?
For optimal durability and anti-slip performance, two to three thin, even coats are recommended. Three coats are best for high-traffic areas or surfaces exposed to harsh weather.
Can I use this on a wooden porch or steps?
Yes, this product is suitable for all wooden decking, including porches, balconies, and steps, where enhanced safety and durability are desired.
What is the coverage rate?
The coverage rate is up to 8 square meters per litre per coat, depending on the porosity and condition of the wood.
How long does it take to dry?
Drying time is typically 4-6 hours between coats, but this can vary based on temperature and humidity. Ensure the surface is completely dry before walking on it.
Can I apply this over a different brand of decking stain?
Yes, you can apply it over existing, sound decking stains. However, it's recommended to test on an inconspicuous area first to ensure compatibility and adhesion.
Does the anti-slip effect wear off over time?
The anti-slip microbeads are designed for durability, but performance may gradually reduce with heavy wear. Reapplication every 1-3 years will help maintain optimal safety and appearance.
How do I clean the deck after applying the stain?
Regular cleaning can be done with a stiff brush and water. For tougher dirt or algae, use a dedicated decking cleaner. Avoid using harsh abrasive cleaners.
Troubleshooting
Uneven colour finish
Ensure the product was thoroughly stirred before and during application. Apply thin, even coats and avoid over-application in any one area. Ensure adequate drying time between coats.
Poor anti-slip performance
Verify that the recommended number of coats (2-3) has been applied. The microbeads need sufficient coverage to be effective. Ensure the surface is clean and free from oil or grease.
Product not drying
Check environmental conditions. Avoid application in very high humidity, cold temperatures, or direct sunlight. Ensure adequate ventilation. If applied too thickly, drying may be prolonged.
Algae or mould growth after application
While the product contains an algicide, severe environmental conditions can still lead to growth. Clean the affected area with a decking cleaner and reapply the stain if necessary. Ensure good air circulation around the deck.
Pros and Cons
Pros
- Significantly improves decking safety with anti-slip properties.
- Protects against algae and mould growth.
- Offers an attractive, natural-looking wood finish.
- Durable and long-lasting protection.
- Suitable for a variety of wooden deck surfaces.
Cons
- Requires two to three coats for best results, increasing application time.
- Coverage rate is moderate (up to 8m² per litre), requiring careful calculation for larger projects.
- Colour is semi-transparent, which may not be suitable for those seeking a solid colour finish.
Setup, Compatibility & Care
Preparation:
Ensure the wood surface is clean, dry, and free from dirt, grease, and loose particles. For previously stained wood, ensure old finishes are sound or remove any flaking/peeling areas. Bare wood should be cleaned and may benefit from a pre-treatment with Cuprinol Decking Cleaner & Reviver.
Application:
Stir the product thoroughly before and during use. Apply two to three thin, even coats using a brush or roller. Allow adequate drying time between coats, typically 4-6 hours depending on conditions. For best results, apply in dry weather, avoiding direct sunlight and frost.
Compatibility:
Suitable for use on all types of wooden decking, including softwoods and hardwoods. Can be applied over existing stains and finishes, provided they are sound.
Care:
Clean the surface with a stiff brush and water to remove surface dirt. For stubborn stains or algae, use a specific decking cleaner. Reapplication may be needed every 1-3 years depending on traffic and weather exposure.