Best current price£8.88from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£8.88Visit shop Phoenix Contact M12 4-Pin Unshielded Connector With Push-Lock Spring - 1424655
Visit shop20 offers from £8.88 - £80.38
View price history by clicking the chart icon.
The Phoenix Contact 1424686 is a M12 sensor connector designed for field assembly, offering a robust and reliable solution for connecting sensors and actuators in demanding industrial environments. Its key benefit lies in the tool-free Push-in connection technology, which significantly speeds up installation and maintenance. A potential consideration is its specific A-coded configuration, which requires compatibility with other A-coded components.
| Model Part Number | 1424686 |
|---|---|
| Brand | Phoenix Contact |
A-coded is a standard mechanical and electrical keying for M12 connectors. It ensures that only components with the same coding (A-coded) and pin configuration (5-pin in this case) can be connected, preventing incorrect pairings in systems with different types of signals or power requirements.
Yes, this connector is designed to accommodate solid-core conductors with a cross-section of 0.14 to 0.75mm² using the Push-in connection technology.
The connector has a rated current of 4A and a rated voltage of 60V. It is suitable for signal applications and low-power sensor/actuator connections.
To disconnect a wire, simply activate the lever again and pull the conductor out of the terminal.
With its IP65 rating, the connector is protected against dust and low-pressure water jets. However, it is designed for industrial environments and should be used in conjunction with appropriate cabling and enclosures for full protection against prolonged outdoor exposure or harsh weather conditions.
The connector is designed to accommodate external cable diameters ranging from 4 mm to 8 mm.
Please refer to the manufacturer's (Phoenix Contact) official documentation or contact your supplier for specific warranty information, as it can vary by region and reseller.
Verify that the connector is securely mated with its counterpart. Check that the wires are correctly inserted into the Push-in terminals and that the lever is fully engaged. Ensure the correct pin assignment is used on both ends and that the upstream power supply is active and within the specified voltage range (60V).
Inspect the wire connections for any signs of loose strands or improper insertion into the Push-in terminals. Ensure the external cable diameter is within the specified range (4-8 mm) and that the cable is properly secured to prevent strain on the internal connections. Check the mating connector for any debris or damage.
Ensure the conductor is stripped to the correct length and that no stray strands are preventing insertion. For stranded conductors, ensure they are not excessively frayed. The Push-in connection is designed for ease of use, but some resistance is normal. If significant force is required, re-check wire preparation.
Setup: To connect a wire, simply activate the lever on the connector, insert the stripped end of the conductor into the designated Push-in socket until it is fully seated, and then release the lever. The connector is designed to accept stranded conductors with or without cable end sleeves. Ensure the conductor's stripped length is appropriate for the socket depth.
Compatibility: This connector is M12, A-coded, and has 5 positions. It is designed to mate with other M12, A-coded, 5-pin female connectors. Always verify that mating components share the same coding (A-coded) and pin count to ensure proper function and prevent damage.
Care: Keep the connector clean and dry when not in use. To clean the connector, use a soft, dry cloth. Avoid using solvents or abrasive materials. Ensure the connector is securely mated to prevent ingress of dust or moisture.
