Draper Venom Upvc Handsaw - 500mm - 13Tpi/14Ppi

This saw features 13 TPI and 14 PPI (Points Per Inch), which is optimized for cutting plastics.

While it might cut through softer woods, it is specifically designed and optimized for UPVC and hard plastics. Using it on wood may result in a poor finish and damage to the teeth.

Always wipe the blade dry after use and store it in a dry environment. The ultra-tough lacquer coating offers significant protection, but regular drying is essential.

Yes, the saw is fitted with an ergonomic soft grip handle designed for user comfort, even during prolonged periods of use.

The hardpoint teeth are very durable but cannot be easily sharpened at home. If the saw feels dull, it may need replacement or professional servicing if available for this type of blade.

The double ground teeth are designed for faster cutting and optimal sawdust removal, working efficiently in both the forward and reverse cutting actions.

This saw is specialized for UPVC and hard plastics. For general-purpose cutting of various materials, a different type of saw would be more appropriate.

Ensure the saw is cutting on the push stroke if the teeth are optimized for that, or ensure you are using adequate pressure. Check that the blade is not dull or damaged. Confirm you are cutting the correct material (UPVC/hard plastics).

Ensure the kerf (width of the cut) is wide enough for the blade to move freely. The lacquer coating should help reduce friction, but ensure no debris is caught in the cut.

Check the blade for damage or missing teeth. Ensure a smooth, consistent sawing motion. The saw is designed for UPVC and hard plastics; using it on softer materials may result in a rougher finish.

The lacquer coating provides protection, but prolonged exposure to moisture can still cause rust. Wipe the blade dry immediately after use and store in a dry place. Minor surface rust can often be removed with a fine abrasive pad, followed by drying and light oiling.