This Smartseal Imprinted Concrete Sealer provides ultimate protection for patterned imprinted conc...This Smartseal Imprinted Concrete Sealer provides ultimate protection for patterned imprinted concrete surfaces, offering a durable Silk/Wet Look Finish. It seals, protects, and enhances driveways and patios, safeguarding against cracks and damage from weathering and vehicle use. The user-friendly application is possible with a natural hair broom, achieving coverage of 4-6 m² per litre per coat, depending on surface porosity. It offers comprehensive defence against algae, dirt, moss, and lichens, and is resistant to UV rays and chemicals, preventing colour loss. For existing colour loss, consider the Matt Imprinted Concrete Sealer with Colour Tints and an Anti Slip additive for improved safety. Smartseal offers five-star customer support for choosing the right product. The sealer is clear, with a 6-month guarantee. It is a solvent liquid model number 5061002784010. It is available in Matt or Silk Finish and helps re-colour and re-seal imprinted concrete driveways and patios, restoring original colouring of stamped or pressed concrete. It is non-yellowing, resistant to water, alkalis, and acids, and contains a UV absorber to protect from ultra-violet light and prevent colour loss. Expected protection is between 3-5 years, varying with traffic, weather, and maintenance. It is easy to apply with a sprayer or broom and is BS5750/ISO9000 quality approved.
This guide helps homeowners and professionals protect and enhance their imprinted concrete surfaces using the Smartseal Imprinted Concrete Sealer. The sealer provides a durable, silk/wet look finish, protecting against weathering and wear. A key consideration is proper surface preparation for optimal results. This guide will walk you through the key features, best practices, and troubleshooting to get the most out of your Smartseal sealer.
All features
Model Part Number
5061002784010
Brand
B&Q
Extended Product Information
FAQs
How long does the sealer last?
The Smartseal Imprinted Concrete Sealer typically provides protection for 3-5 years, depending on the amount of traffic, weather conditions, and maintenance.
What is the coverage rate?
Coverage is approximately 4-6 m² per litre per coat, depending on the porosity of the concrete.
Can I apply the sealer in any weather?
No, it is best to apply the sealer in dry weather with temperatures above 10°C. Avoid applying in direct sunlight or when rain is expected.
How do I clean the surface after application?
Use mild soap and water. Avoid using harsh chemicals or abrasive cleaners that could damage the sealer.
What should I do if my concrete has existing color loss?
For existing color loss, consider using the Matt Imprinted Concrete Sealer with Colour Tints to restore the original coloring.
Is the sealer resistant to chemicals?
Yes, the sealer is resistant to water, alkalis, and acids, providing long-lasting protection.
What kind of finish does this sealer provide?
This sealer provides a durable silk/wet look finish.
What is the guarantee on this product?
This product comes with a 6-month guarantee.
Troubleshooting
Sealer is not adhering properly.
Ensure the surface is clean and free of contaminants. Make sure the surface is dry before application. Consider using a surface cleaner before application.
The finish is not as expected.
Ensure even application. Apply a second coat if necessary. Make sure you are using the correct product for your desired finish (Silk/Matt).
Color is fading.
Ensure UV exposure is minimised. Reapply the sealer, or consider using a tinted sealer for color restoration. Check for damage and repair where needed.
Pros and Cons
Pros
Provides a durable and attractive silk/wet look finish.
Protects against UV rays and chemical damage.
Easy to apply with a sprayer or broom.
Offers comprehensive defense against common surface problems.
Helps restore the original coloring of stamped concrete.
Long-lasting protection with proper maintenance.
Cons
Coverage varies based on surface porosity.
Requires proper surface preparation for optimal results.
Performance may vary based on traffic and weather conditions.
Additional products may be needed for existing color loss.
Requires maintenance to ensure longevity.
Setup, Compatibility & Care
Surface Preparation:
Ensure the concrete surface is clean, dry, and free from loose debris, algae, and existing sealers. Clean with Smartseal cleaner if necessary.
Allow the surface to dry completely before application.
Application:
Apply the sealer using a sprayer or a natural hair broom.
Apply the sealer evenly, avoiding puddling.
Apply one or two coats, allowing each coat to dry completely before applying the next.
Compatibility:
Compatible with most imprinted concrete surfaces. Always test in an inconspicuous area first.
For existing color loss, consider using the Matt Imprinted Concrete Sealer with Colour Tints.
Care:
Clean the surface regularly with mild soap and water.
Avoid using harsh chemicals or abrasive cleaners.
Reapply the sealer every 3-5 years, depending on traffic and weather conditions, to maintain protection.