Best current price£5.86from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.86Visit shop Usb 3.0 Superspeed Cable Type Plug A To Type B Plug 3M Blue 5055383486618
Visit shop
B&Q£8.80Visit shop B&Q - Usb 3.0 Superspeed Cable Type Plug A To Type B Plug Blue 3M
Visit shop4 offers from £5.86 - £8.80
View price history by clicking the chart icon.
This kenable USB 3.0 SuperSpeed cable is designed for users needing fast data transfer between USB 3.0 enabled devices and computers. Its primary benefit is supporting speeds up to 5Gbps, significantly faster than USB 2.0. A potential caveat is that actual speeds may vary based on connected hardware limitations. Key features include its 3-meter length, blue color, USB 3.0 SuperSpeed compliance, backward compatibility with USB 2.0 and 1.1 (Type-A connections only), 28 AWG conductor size, 5.0mm overall diameter, shielding, braiding, drain wire, gold contacts, and nickel connector.
| Model Part Number | 008661 |
|---|---|
| Brand | kenable |
This cable supports USB 3.0 SuperSpeed, with theoretical maximum data transfer speeds of up to 5Gbps. However, actual speeds may vary depending on the capabilities of your connected devices and computer.
Yes, this cable is backward compatible. It will work with USB 2.0 and USB 1.1 devices, but the data transfer speed will be limited to the maximum speed of the older USB standard (480Mbps for USB 2.0).
SuperSpeed refers to the significantly increased data transfer rate of USB 3.0 compared to its predecessors. It denotes the 5Gbps signaling rate, which is up to ten times faster than USB 2.0's 480Mbps.
To achieve USB 3.0 speeds, both your computer's USB port and the connected peripheral device must support USB 3.0. Also, ensure you are using the blue USB 3.0 Type-A ports on your computer, which are standard for the higher speed.
AWG stands for American Wire Gauge. A lower AWG number indicates a thicker wire, which can carry more current and reduce signal loss over distance. 28 AWG is standard for USB data and power conductors in cables of this type.
Shielding and braiding help protect the data signals from electromagnetic interference (EMI) and radio frequency interference (RFI). This reduces errors during data transmission and improves signal integrity, especially over longer cable lengths.
While not a strict standard, manufacturers often use blue coloring for the internal plastic housing of USB 3.0 Type-A connectors and sometimes for the cable itself to visually distinguish them from USB 2.0 (often black or white).
Ensure both ends of the cable are securely plugged in. Try a different USB 3.0 port on your computer. Verify that the device is powered on and functioning correctly. If connected to a USB 3.0 port but running slowly, ensure the device itself supports USB 3.0 speeds.
Confirm that both the computer's port and the connected device are USB 3.0 compatible. Ensure no other high-bandwidth USB devices are bottlenecking the connection. Check for software or driver updates for your USB controller and the connected device. Test with a different USB 3.0 cable if possible.
Inspect the cable for any visible signs of wear, cuts, or damage to the connectors. If damage is found, replace the cable immediately to prevent further issues or potential data corruption.
Setup: Simply plug the Type-A connector into a USB 3.0 or USB 2.0/1.1 port on your computer and the Type-B connector into the corresponding port on your peripheral device (e.g., printer, external drive enclosure, docking station). Ensure the connections are firm.
Compatibility: This cable is fully compatible with USB 3.0 SuperSpeed devices. It is also backward compatible with USB 2.0 and USB 1.1 standards for the Type-A connection, meaning it will function with older devices, though at their respective slower speeds. The Type-B connector is specific to USB 3.0 standards but will generally fit into USB 2.0 Type-B ports, operating at USB 2.0 speeds.
Care: To maintain optimal performance and longevity:
