Hycote Colour Spray Paint - Grey - 150ml

Best current price£9.59from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.59Visit shop Hycote Colour Spray Paint XDNS705 Nissan Arctic White 150ml
Visit shop
Best current price£9.59from eBay
Shopping.co.uk recommended and popular offers
eBay£9.59Visit shop Hycote Colour Spray Paint XDNS705 Nissan Arctic White 150ml
Visit shop4 offers from £9.59 - £11.99
View price history by clicking the chart icon.
This Hycote Colour Spray Paint in Grey (150ml) is designed for vehicle owners and DIY enthusiasts seeking a precise, durable paint match for specific car models. Its key benefit is offering double the coverage of standard aerosols due to concentrated paint and advanced technology, saving time and material. A potential caveat is the need for proper surface preparation and application technique to achieve the best results.
| Colour | Grey |
|---|---|
| Model Part Number | XDNS705 |
| Brand | Hycote Paints |
| Container Volume | 150 |
The 'double coverage' is achieved through a higher concentration of paint solids within the aerosol. To maximize this, apply thin, even coats and ensure the can is adequately shaken. Avoid applying excessively thick coats, which can lead to runs and waste paint.
Yes, this paint is suitable for plastics. However, ensure the plastic is clean and free from silicone or release agents. For best adhesion on interior plastics, a specific plastic primer is recommended before applying the colour coat.
The surface must be clean, dry, and degreased. Remove any loose paint, rust, or contaminants. Lightly abrade or sand glossy surfaces to create a key for the paint to adhere to. If painting bare metal, a primer is essential.
Hycote Double Acrylic paints are fast drying. Touch dry times are typically within 10-15 minutes, with recoating possible after 30-60 minutes, depending on temperature and humidity. Full hardness develops over a longer period.
While the paint itself is tough and durable, applying a clear coat (like Hycote's own acrylic or lacquer products) will enhance protection, gloss, and longevity, especially on automotive applications exposed to harsh conditions.
Yes, the product description states compatibility with wood and ceramics. Ensure these surfaces are clean, dry, and properly prepared (e.g., sanded wood, primed ceramics if necessary) for optimal adhesion.
Ensure the nozzle is not blocked. Turn the can upside down and spray to clear. Shake the can vigorously for at least two minutes before and during use. Keep the can moving while spraying.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants. Lightly sand glossy surfaces. A primer may be necessary for certain materials like bare metal or some plastics.
The paint is likely being applied too thickly or from too close a distance. Apply in multiple thin, even coats, allowing adequate drying time between each. Maintain a consistent spray distance of approximately 25-30cm.
While colour matched to OEM codes, variations can occur due to age, fading, or previous repairs. Always test spray on an inconspicuous area first. For critical colour matches, consider professional advice or larger paint quantities.
Setup: Ensure the surface to be painted is clean, dry, and free from grease, oil, and dust. Lightly sand any glossy surfaces to improve adhesion. For optimal results, apply a suitable primer if painting over bare metal, plastic, or previously incompatible finishes. Shake the can vigorously for at least two minutes before use, and periodically during application.
Compatibility: This paint is compatible with OEM finishes and suitable for use on acrylic and cellulosic base coats. It can be applied directly to metals, plastics, wood, and ceramics. Always test on an inconspicuous area first, especially when applying over existing paintwork.
Care: Store the can in a cool, dry place away from direct sunlight and sources of ignition. After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent blockages. Clean up any spills or overspray immediately with a suitable solvent.